<![CDATA[Leddy Group: jobboards]]> http://JOBS.LEDDYGROUP.COM/ en-us <![CDATA[Material handler (2nd Shift)]]> Leddy Group is seeking a 2nd shift Material Handler with forklift experience in Belmont, NH. This position requires the following: ability to follow directions and written instructions, basic math skills including units of measurement, and prior experience with measuring devices: i.e. tape measure, micrometer.
 
Experience with a forklift is preferred but not required. 
 
To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com. 

 

]]>
Tue, 26 Sep 2017 00:00:00 EDT 1
<![CDATA[Part-Time Payroll Assistant]]> Leddy Group is seeking a part-time Payroll Assistant for our client in Rutland, VT for the next six months. The position will require an individual to work 3-4 hours each morning Monday through Friday. Candidates must have experience working with QuickBooks Payroll. Additional responsibilities will include filing payroll reports and general data entry.

Candidates must be dependable, prompt, reliable, consistent and have close attention to confidentiality. 

Interested candidates can apply by visiting our website at www.leddygroup.com, by emailing Rutland@leddygroup.com, or  by calling 802-786-2222. 

]]>
Mon, 25 Sep 2017 00:00:00 EDT 1
<![CDATA[Clean Room Medical Assembler]]> Leddy Group is seeking Clean Room Medical Equipment Assemblers in the Rochester, NH area. Position requires candidates to follow clean room guidelines. Position will include solvent bonding, component prep, packaging, and assembly.
 
Candidates should have good manual dexterity, ability to read, write, and speak English, have strong attention to detail, and be dependable. Position works Monday through Friday, 4:30PM-1AM.
 
To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.
]]>
Fri, 22 Sep 2017 00:00:00 EDT 1
<![CDATA[Clean Room Assembler]]> Leddy Group is looking for a Clean Room Assembler for a company in Dover, NH. Candidates should have good hand dexterity, attention to detail and be reliable.

Hours are Monday to Friday; 7am - 3pm. Pay is $10/hr.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Fri, 22 Sep 2017 00:00:00 EDT 1
<![CDATA[Shipping/Receiving Associate]]> Leddy Group is seeking a stockroom Shipping and Receiving Associate in the Lebanon, NH area. Position will perform a wide variety of functions associated with the receiving of parts/materials, shipping materials/products, and stockroom/inventory.

Candidates should have strong manual dexterity skills, ability to stand and walk for long periods of time, ability to lift no more then 50 lbs. Candidates should be self-motivated, reliable, and have the ability to complete fine detailed work. 

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or apply online at www.leddygroup.com.

]]>
Fri, 22 Sep 2017 00:00:00 EDT 1
<![CDATA[Network/Systems Technician]]> Leddy Group is seeking an Network/Systems Technician in Claremont, NH.  Position works with internal team members and external customers over the phone, via email through live chat or in person offering quality support in Network Systems. 

The ideal candidate will have 1-2 years of relevant experience. Associates degree required, Bachelors degree preferred in relevant field. Candidate must have great attention to detail, Be able to work in a team environment and be reliable.

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Fri, 22 Sep 2017 00:00:00 EDT 1
<![CDATA[Part-Time Receptionist ]]> Leddy Group is seeking a Part-Time Receptionist in Hanover. NH. This position will work in the afternoons 3- 5 days per week.  Responsibilities will include answering the phones, opening mail, scanning documents, updating calendars and running errands for a small insurance company.  

Interested candidates can apply by calling our office at 603-727-0102, sending resumes to Lebanon@leddygroup.com or applying online at www.leddygroup.com.

]]>
Fri, 22 Sep 2017 00:00:00 EDT 1
<![CDATA[Entry Level Machine Operator]]> Leddy Group is seeking Entry Level Machine Operators for injection molding plastics in Wilton, NH. This position will involve operating the machine, performing visual inspection on parts and using measuring tools to verify defects. 

Candidates should have good communication skills, have basic math skills, ability to read and use measuring tools, and be dependable. Openings on all shifts. 

Contact Leddy Group to apply.  Email bedford@leddygroup.com or visit www.leddygroup.com.

]]>
Thu, 21 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Mechanic (2nd Shift)]]> Leddy Group is seeking an experienced Machine Mechanic for a long term 2nd shift opportunity. 2+ years' experience is preferred.  

Candidates must have experience performing repairs and maintenance on equipment used in production, be reliable and dependable, and be willing to learn in order to troubleshoot and complete repairs. Programmable Logic Controller experience a plus.

Interested candidates can apply by visiting our website at www.leddygroup.com, emailing Rutland@leddygroup.com or calling 802-786-2222. 

]]>
Thu, 21 Sep 2017 00:00:00 EDT 1
<![CDATA[Accounts Payable/Payroll Associate]]> Leddy Group is currently seeking an AP/Payroll Associate for a client in the Greater Milford, NH area. This would be a full-time, long term role for the right candidate.

Responsibilities:

  • To assist the Business Administrator and Assistant Business Administrator in the successful operation of the Business Office.
  • To recognize the importance of accuracy, confidentiality and the necessity to meet deadlines.
  • Using the determined business office calendar of Payroll/Accounts Payable (AP) which runs a every other week schedule
  • During Payroll weeks the individual is responsible for processing payroll and the associated deductions and taxes.
  • During AP weeks (s)he is responsible for the timely processing of invoices for products and services.

Applicants should have at least 2 years of accounts payable or payroll experience.

To apply please call Leddy Group at 603-666-4051 or email resumes to Bedford@leddygroup.com.

]]>
Thu, 21 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Milling Operator]]> Leddy Group is seeking a CNC Milling Operator in Seabrook, NH. Responsibilities will include utilizing documents, fixturing and tooling provided, and performing any and all tasks necessary to set-up, run and breakdown a process in a CNC milling work center that will give the planned results for manufacturing and part through the 1st piece inspection and production run.

The ideal candidate will have 2+ years experience in a machine shop operating mills. Pay is dependent on experience. The hours of the position are Monday through Thursday 4:00 PM to 2:00 AM. 

To apply, send your resume to seacoast@leddygroup.com, call 603-749-4810 or apply online at www.leddygroup.com. 

]]>
Thu, 21 Sep 2017 00:00:00 EDT 1
<![CDATA[General Laborer]]> Leddy Group is actively seeking a General Labor candidate for a client in Londonderry, NH. The general labor role will be 1st shift, full-time, and long term for the right candidate.

This role will involve cutting plastic parts, trimming, and sorting parts. This role does require at least 6 months of manufacturing experience and excellent attendance. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Wed, 20 Sep 2017 00:00:00 EDT 1
<![CDATA[Housekeeper (Temp)]]> Leddy Group is currently seeking candidates to fulfill a Housekeeping role in Killington, VT. We are looking for reliable candidates for a first shift opportunity, 9:00 am - 5:00 pm to work 3 weeks starting September 25th

Successful candidates will have some type of prior cleaning experience.

To apply, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Wed, 20 Sep 2017 00:00:00 EDT 1
<![CDATA[Custodian/Facilities Associate]]> Leddy Group is actively seeking an experienced Custodian/Facilities Associate for a client in Hudson, NH. This will involve the following:

 Responsibilities:

  • general cleaning
  • sweep and mop the floors
  • collect and empty trash containers
  • restock restroom supplies
  • Interior and exterior cleaning
  • snow removal
  • waxing of floors
  • general building maintenance

Qualifications:

  • Must be able to stand and walk for the duration of the shift
  • Must be able to follow directions well
  • Must be able to work independently
  • Must be able to lift 50 lbs
  • If they have entry level handyman general skills in plumbing, carpentry and painting.

Must be reliable, flexible, and able to work late if needed. This is a 1st shift, full-time, long term role for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Wed, 20 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Turning Lathe Operator]]> Leddy Group is seeking a CNC Turning Lathe Operator in Seabrook, NH. Responsibilities will include utilizing documents, fixturing and tooling provided, and performing any and all tasks necessary to set-up, run and breakdown a process in a CNC lathe work center that will give the planned results for manufacturing and part through the 1st piece inspection and production run.

The ideal candidate will have 2+ years experience in a machine shop operating lathes. Pay is dependent on experience. The hours of the position are Monday through Thursday 4:00 PM to 2:00 AM. 

To apply, send your resume to seacoast@leddygroup.com, call 603-749-4810 or apply online at www.leddygroup.com. 

]]>
Wed, 20 Sep 2017 00:00:00 EDT 1
<![CDATA[Materials Manager]]> Leddy Group is looking for a Materials Manager for a company in Portsmouth, NH. Some duties include:

  • Manage, control and direct the materials planning, strategic  procurement, inventory control and shipping / receiving functions
  • Mentors and develops direct reports and entire Materials Team. Listens, supports, engages and encourages employee suggestions and input to achieve exceptional results.
  • Develops strategic partnerships with existing suppliers, assesses and manages supply chain risk, controls costs and positions the supply chain for future growth.
  • Uses project management tools and best practices to effectively oversee multiple projects across the materials group.
  • Collaborates with the management team to develop an inventory strategy that balances customer service levels and managed working capital targets.
  • Maintains strict control over gross inventory to minimize inventory levels while ensuring material availability to facilitate the highest level of customer satisfaction through consistent on-time delivery performance.

Candidates should have strong project management and organizational skills, the ability to adapt to change and maintain a positive attitude, and excellent written and verbal communication skills. 

Candidates with 10+ years experience preferred.

Pay is DOE.

To apply, please go to leddygroup.com or send resumes to seacoast@leddygroup.com.

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Clerk]]> Leddy Group is seeking a Warehouse Clerk in Dover, NH. Duties include emptying containers and palletizing boxes.

Position starts 9/20/17 and the hours are 7:30am - 4:00pm.

Contact Leddy Group at 603-749-4810 to apply, email seacoast@leddygroup.com or visit www.leddygroup.com.

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[Maintenance Worker ]]> Rochester, NH - Leddy Group hiring Maintenance Worker for a temporary assignment to help with various projects to include painting, general clean up, and light maintenance when units leases are up. 

Painting experience using roller and brush are highly preferred. This is a first shift position working part time, Monday through Friday.  

To apply, send your resume to Seacoast@LeddyGroup.com or call 603-749-4810 to be screened for this position immediately. 

 

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[Assembler]]> Leddy Group is currently seeking an Assembler in Hampton, NH.
 
Ideal candidates will be mechanically inclined, have previous machine operating or assembly experience, and be hardworking.  
 
This position is very trainable - a mechanical aptitude and some assembly experience required. 
 
This is a 1st shift position that will run Monday through Friday, 8AM-4:30PM.
 
To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.
 
 

 

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[Maintenance Worker]]> Rochester, NH - Leddy Group hiring Maintenance Worker for a temporary assignment to help with various projects to include painting, general clean up, and light maintenance when units leases are up. 

Painting experience using roller and brush are highly preferred. This is a first shift position working 7:00 am-3:30 pm, Monday through Friday.  

To apply, send your resume to Seacoast@LeddyGroup.com or call 603-749-4810 to be screened for this position immediately. 

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[Woodworker and Window Insulators]]> Leddy Group is seeking experienced Woodworkers and Window Insulators in Rutland, VT.  Responsibilities may include production of windows and doors, finish work/painting, CNC operation, and leadership opportunities.

Candidates should have woodworking or window insulation experience, be a quick learner, have a good work ethic and be willing to assist others.

This is a full time first shift position.  Interested candidates can apply by emailing Rutland@leddygroup.com, calling 802-786-2222.or visiting www.leddygroup.com.

 

]]>
Tue, 19 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift CNC Machinist]]> Do you have a background in CNC Milling? Are you looking to join a company that is well established and growing? 

Leddy Group is working with a client in Laconia that is seeking to add experienced CNC machine operators to their 2nd shift. This client is looking for applicants that have CNC milling and turning experience, visual inspection, and and mechanically inclined. This role is full-time and long term for the right candidate.

To inquire further please call Leddy Group at 603-666-4051 or email resumes to Bedford@leddygroup.com. To apply online visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Dietary Supervisor]]> Leddy Group is looking for a Dietary Supervisor for Dover, NH. This position will cook, prepare menus, supervise a staff of six, cover sick days and vacation days, etc.  Also, this role will interact with residents so customer service is important

Candidates must be willing to pitch in when needed as well as be flexible as they are a small staff.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Landscaper/Mason]]> Leddy Group is looking for a Landscaper/Mason for a company in Greenland, NH. Primary duties are:

  • Patio work including walkways
  • Walls
  • Pool installation

Previous landscaping experience preferred. This is a 1st shift positions available. Pay is $18 an hour. 

If interested, please apply at LeddyGroup.com, send resumes to seacoast@LeddyGroup.com, call 603-749-4810 or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Leddy Group is seeking an individual for a Production position in the Brentwood, NH area. Prior experience with manufacturing or production is preferred. Position requires candidate to be able to read English and ability to stand while working 12 hours shifts.

Candidates should be hard working, able to keep up with production goals, and have a positive attitude. Position works 6AM-6PM. Steel toed boots and drug screening require

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Picker/ Packer]]> Leddy Group in the Lebanon, NH area is seeking a Picker / Packer to work in a supply warehouse. Position will receive a pick list, select items needed and bring to proper location to be shrink wrapped. Position requires lifting, reaching for items, bending, and lots of walking.
 
Candidates should have some prior warehouse or manufacturing experience, good attention to detail, ability to handle a fast pace, and learn quickly. Position works Monday through Friday, 1st shift. Background check and drug screening is required.
 
Contact the Leddy Group to apply. Visit www.leddygroup.com, email lebanon@leddygroup.com or call 603-727-0102.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Technician]]> Leddy Group is seeking a Production Technician in the Lebanon, NH area. Position will perform a variety of repetitive operations to assemble precision, electro-mechanical products or mechanical subassemblies.  Technician will also be tasked with operating automatic and semiautomatic assembly equipment as well as small hand tools 

Candidates should have strong manual dexterity skills, ability to work from verbal or written instruction, ability to lift up to 25lbs.  Candidates should be self-motivated, reliable and have the ability to complete fine detailed work. 

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Plastics Production/Machine Operating NIGHTS]]> Leddy Group is seeking a general Plastics Production/Machine Operating Worker for a manufacturing company in Barrington, NH. Candidates should be able to stand for the entire shift, read, write, and speak English, and be able to lift up to 50lbs. 

Candidates should be dependable, hardworking, and focused. 

Contact Leddy Group to apply.  Email seacoast@ leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd shift Inspection/Machine Set-up Worker]]> Leddy Group is actively seeking a 2nd shift Inspection/Machine Set-up candidate for a client in Salem, NH. This role will be full-time and develop into a permanent role based on performance. The job duties are as follows: 

  • Handling electronic components
  • Setting up robotic equipment
  • Inspecting solder applications

Candidates should have the following:

  • Excellent manual dexterity
  • Ability to handle small component packages
  • Able to setup machines and adjust as needed
  • Microscope experience desired

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Pool and Hot Tub Technician]]> Mon, 18 Sep 2017 00:00:00 EDT 1 <![CDATA[3rd Shift Production ]]> Leddy Group is seeking a 3rd shift Production Worker in Rutland VT for a project. Responsibilities will include sorting and packaging items as well as some production line work.

Interested candidates can apply by visiting our website at www.leddygroup.com, emailing Rutland@leddygroup.com or calling 802-786-2222. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift Production Worker]]> Leddy Group is seeking 2nd shift Production Workers in Rutland VT. Responsibilities will include sorting and packaging items as well as some production line work.

Interested candidates can apply by visiting our website at www.leddygroup.com, emailing Rutland@leddygroup.com or calling 802-786-2222. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Call Center Representative]]> Leddy Group is seeking candidates for a great call center opportunity in Rutland, VT! This position will involve answering inbound calls, determining the customer's needs and then dispatching the call as required.

This is a long term, permanent opportunity for the right candidate. This position offers a flexible schedule, availability on nights and weekends is required. 

To apply, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com, or visit our website at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Pool and Hot Tub Technician]]> Leddy Group is seeking a Pool & Hot Tub Technician in the Ludlow, VT area. Position includes installation and maintenance. This position is full time and year round. The client will train the right hardworking, reliable individual. Candidates must have a clean driving record. 

If interested, please email your resume to rutland@leddygroup.com, call 802-786-2222 or visit our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electronics Technician]]> Leddy Group is seeking an Electronics Technician in Lebanon, NH. The Electronics Technician will respond to reports of machine breakdowns and requests for general repairs in a timely fashion. They will determine root cause of problems by applying technical knowledge and by working with the appropriate personnel.

Candidates must have a working knowledge of machinery and controls such as Mills, Lathes, Heat Treat Furnaces, Grinders, and Assembly Equipment. An in-depth knowledge of electronic and electrical equipment is required, and knowledge of Siemens, Allen Bradley, Fanuc, and PLC’s preferred. High School Diploma or GED required; Associate Degree in Electronics Engineering or equivalent experience in a similar job field preferred.

This is a 1st shift role with the opportunity to go direct. Pay range is $15-18/hr DOE.

Interested candidates can apply by emailing a resume to Lebanon@leddygroup.com, calling 603-727-0102 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Post-Braze Bench Inspector]]> Leddy Group is seeking a Post-Braze Bench Inspector in Exeter, NH. This position requires a machine shop background. The individual will inspect product at various stages of production from tack weld to post braze including various visual and mechanical evaluations. This position will also perform routine quality tasks associated with AS9100 compliance, and handling of discrepant material.

Requirements:

  • Ability to read and understand blueprints
  • Able to measure components using Dial Indicators and Height Stands, inspecting assemblies to .005
  • Review follow process sheets for fixturing instructions
  • Ability to move aluminum waveguide components in a soft state, usually at a T3 hardness temper before they are heat-treated back to a T6 hardness
  • Cosmetics skills using various grinding tools
  • 2 to 3 years’ experience
  • Able to follow basic directions, verbal and written
  • Visual and measurement of products coming from post braze
  • Inspect in-process product utilizing various measuring tool and fixtures
  • Document inspection results by completing reports and logs; summarizing re-work
  • Able to maintain a safe and healthy work environment by following standards and procedures; complying with legal regulations
  • Must be able to work from various documents in multiple formats/media (specification, drawings, process sheets, ECO’s), written, and verbal instructions
  • Able to work with Design Engineering and Manufacturing Engineering

This is a 1st shift, Monday-Friday position. Pay is DOE. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift CNC Machinist]]> Leddy Group is currently seeking a 2nd Shift CNC Machinist for a great family owned company in Nashua, NH. This is a long term, permanent opportunity for the right candidate. 

Operating several CNC machines, loading bars of material, monitoring operation & taking measurements, while making quality parts, safely as part of a team.

  • Maintaining quality assurance procedures and processes, performing quality audits
  • Maintaining equipment and supplies
  • Maintaining specifications by observing machining operations, detecting malfunctions, troubleshooting processes; adjusting and reprogramming controls, replacing worn tools
  • Maintaining safe operations by adhering to safety procedures and housekeeping
  • Maintain equipment by completing preventive maintenance requirements, following manufacturer’s instructions, and troubleshooting malfunctions

Job requirements:

  • Minimum of two years in manufacturing setting
  • Familiarity with blue prints a plus
  • Basic math skills, including decimals and ability to convert between inches and metric measurements. Algebra and geometry a plus!
  • Knowledge of metals and materials, including but not limited to steel, stainless steel, and copper, and their machine-ability and ability to use measuring equipment (micrometers, Dial or Digital Calipers, Optical comparator) a plus!
  • Demonstrated initiative and improvement mindset a must; Familiarity with quality concepts, such as in-process auditing; lean manufacturing a plus
  • Proven track record of reliability, dependability, maturity, attention to detail and ability to learn is key as we will be providing comprehensive training on CNC machining.

To apply for this position, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Picker/Packer (1st Shift)]]> Leddy Group is currently seeking a 1st shift Picker/Packer for a client in Londonderry, NH. This role will involve picking items within a specified area to fulfill orders. The job will also involve stocking, assisting with inventory counts, and special projects as assigned.

This role does require being able to lift up to 50 lbs, being able to stand and walk for most of the shift, and the ability to work overtime, including weekend work. Candidates should have 1-2 years of warehouse experience as well as a High School Diploma or GED.

This role is on 1st shift and is long term based on performance. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Swiss Lathe Machinist]]> Leddy Group is seeking an experienced Swiss Lathe Machinist in Seabrook, NH.
 
Candidates must have at least five years of prior related experience, have strong attention to detail, and strong mechanical and trouble shooting ability.  Candidates must also be able to read blueprints, able to use measurement tools, and able to work independently. 
 
Contact Leddy Group to apply. Visit www.leddygroup.com, call 603-748-4910 or email seacoast@leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electro-Mechanical Technician]]> Leddy Group is seeking an Electro/Mechanical Technician in Hanover, NH. Responsibilities will include installation and maintenance of machines, performing emergency/unscheduled repairs, and performing preventative maintenance.

This position works Monday - Friday 3PM - 11PM. Candidates should have at least 5 years of experience working in a manufacturing environment as well as experience as an electro/mechanical technician.  High school diploma/GED required.  Pay is $20-25/hr DOE.

Interested candidates can apply by emailing Lebanon@leddygroup.com, calling 603-727-0102 or visiting our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Tool Grinder]]> Leddy Group is seeking a hardworking and reliable Tool Grinder in Belmont, NH. Position will require knowledge of grinding tools, and knowledge of measuring devices such as micrometers, calipers and verniers. 

Candidates should have a machining background and basic manufacturing experience. This is a full-time, long term opportunity on 1st shift.

To apply please contact Leddy Group at bedford@leddygroup.com or 603-666-4051. For more information visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift Picker/Packer]]> Leddy Group is currently seeking a 2nd shift Picker/Packer for a client in Londonderry, NH. This role will involve picking items within a specified area to fulfill orders. The job will also involve stocking, assisting with inventory counts, and special projects as assigned.

This role does require being able to lift up to 50 lbs, being able to stand and walk for most of the shift, and the ability to work overtime, including weekend work. Candidates should have 1-2 years of warehouse experience as well as a High School Diploma or GED.

This role is on 2nd shift shift and is long term based on performance. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 



]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Mechanical Assembler]]> Leddy Group is currently seeking several Mechanical Assembly applicants for a client in the Greater Milford area. This role will involve building sub-assemblies to specifications.
 
Applicants should have at least 1-2 years of recent mechanical assembly experience. This role is full-time, long term for the right candidate.
 
 
To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[PCB Inspector]]> Leddy Group is currently seeking several PCB Inspector applicants for a client in the Greater Milford area. This job involves the visual inspection of printed circuit board assemblies in various stages of production.

Applicants should have at least 1-2 years of recent inspection experience. This role is full-time, long term for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[SMT Operator]]> Leddy Group is actively seeking several SMT Operators for a client in the Greater Milford Area. This role will involve loading machines, inspection, and working with a team to get the work done.

Applicants should have at least 1 year of SMT experience in a manufacturing setting.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift Machine Operator ]]> Leddy Group is currently seeking Machine Operators for a client in Amherst, NH. The position would involve running the machine, standing for most of the shift, and working near the ovens where the molds come out.

This is a 2nd shift, long term opportunity for the right candidate.

To apply, please call Leddy Group at 603-666-4051, email resumes to Bedford @leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[PCB Solderer]]> Leddy Group is currently seeking a PCB Solderer for a client in the Greater Milford Area. This role will involve hand-soldering components onto printed circuit boards.

Applicants should have a current soldering certificate, basic math skills, and excellent hand eye coordination.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[3rd Shift Inspector]]> Direct Hire Opportunity in Dover, NH!

Leddy Group is looking for an Inspector for a company in Dover, NH. The inspector is responsible for tracking defects in finished fabric, such as tears, stains, holes and warps. 

3rd shift opportunities available. Pay is $12/hour with shift differentials.

If interested, please apply at www.leddygroup.com, call 603-749-4810  or send resumes to seacoast@leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Delivery Driver/Warehouse Associate]]> Leddy Group is seeking a Delivery Driver/Warehouse Associate in Manchester, NH.  Position will deliver and install appliances at customer properties, perform warehouse and store functions as needed, and do whatever is necessary to satisfy both internal and external customers.

Candidates should be able to lift up to 75lbs with assistance, have basic mechanical aptitude, ability to read and understand maps and directions, and have good communication skills.  Candidate must  have a valid drivers license. 

Background check, drug screening, and driving record required.  This is a first shift, long term opportunity for the right fit candidate.

To apply, please send resumes to bedford@leddygroup.com,  call the office at 603-666-4051 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift Trimmer]]> Leddy Group is seeking Trimmers in Amherst, NH. This is a sit down job the requires trimming excess parts of rubber that come out of the machine, operating the machine, packing parts and putting them together.  This is very basic work and attention to detail a must.

This is a 2nd shift, long term opportunity for the right candidate.

To apply please call Leddy Group at 603-666-4051, email resumes to Bedford @leddygroup.com or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Product Sorter]]> Leddy Group is seeking a Product Sorter in White River Junction, VT.  Position includes creating variety packs of products, loading onto conveyor to be sorted, and packing onto pallets.

Candidates should be dependable, hardworking, and be able to follow directions.  Candidates should be able to lift up to 35lbs and be able to keep up with production goals. 

Position has a varied schedule depending on need.  Candidates must be at least 18 and have one year of solid work experience. 

Contact Leddy Group to apply.  Email lebanon@leddygroup.com, call 603-727-0102  or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[1st Shift Machine Operator ]]> Leddy Group is seeking a 1st Shift Machine Operator (Screw Machines & Lathes) with experience in a machine shop in the Exeter, NH area. 

Candidates should be self motivated and have good attention to detail. Candidates should also be committed and reliable. Position works Monday through Thursday, 7:00AM-5:00PM.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Team Leader]]> Leddy Group is actively recruiting for a Team Leader for a client in Milford, NH. In this role you will be responsible for all of the activities within the manufacturing team, responsibilities may include; communicating with various levels of management, supporting team members to achieve their goals, and performing production work.

Applicants should have at least 2 years of experience in a team lead role in a manufacturing setting. This is a full-time, long term role for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Associate - Weaving (3rd Shift)]]> Leddy Group is currently seeking experienced Weaving Associates for 3rd shift direct hire opportunities in Dover, NH. The ideal candidate will have previous experience in textiles or a similar manufacturing environment.

Responsibilities of the Third Shift Weaver

  • Change weave machines to produce different sizes as required by schedule.

  • Inspect your work and work of others for quality.

  • Safeguarding of equipment to prevent damage.

  • Maintain daily production records.

  • Adhere to plant policies or procedures.

Requirements of the Third Shift Weaver

  • High School Diploma or equivalent

  • Previous experience in textiles or a similar manufacturing environment preferred

  • Strong attention to detail

  • Must be able to use hand and measuring tools

  • Must be able to organize and maintain records

  • Maintain quality/production standards and OSHA/plant safety rules

Compensation of the Third Shift Weaver

  • Starting pay is $12.00 hourly, plus shift differentials. Will consider higher for weaving experience.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[2nd Shift Inspector]]> Currently seeking candidates to fill a 2nd Shift opening right here in Dover! Interested candidates should have at least 1 year of manufacturing experience, high attention to detail and ability to stand for an entire shift. This is a direct hire opportunity!

Responsibilities of the Inspector:

  • Following all company guidelines and procedures and all company safety policies and procedures.
  • Verifying that all fabric has been properly finished, as specified prior to inspector
  • Visually examining finished fabric for defects, such as grease spots, tears, variations in color, finish, construction, etc
  • Repair of defects when necessary using hand tools
  • Completion of all required and necessary paperwork to maintain ISO certification
  • Continually monitoring the process and product for quality improvement

Requirements of the Inspector:

  • The ability to learn to read and/or interpret internal paperwork to CFI specifications
  • The ability to identify various weave patterns, yarn types and fabric types to CFI specifications
  • Ability to lift up to 50 pounds
  • Ability to repeat the same task throughout the shift
  • Ability to learn on the job

Compensation for this position is $12.00/hr with shift differentials for second and third shift. Hours are Monday through Friday 2pm-10:30pm with a 30 min unpaid lunch.

If interested, please apply at www.leddygroup.com, call 603-749-4810 or send resumes to seacoast@leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[HVAC Technician]]> Direct Hire opportunity!

Leddy Group is seeking an HVAC Technician in the Rochester, NH area. This position will be responsible for both residential and commercial calls. The territory ranges from the Ossipee/Wolfeboro/Lakes Region to the Seacoast. 

The hours are Monday-Friday 7:30am-5pm, but could be a longer - a typical day is 8-10 hours. This position will also be on call one night a week and one weekend a month (from Friday at 4:30pm to Monday at 7:30am).

Pay rate is $18-28 an hour; DOE. HVAC certifications are preferred but not required. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Line Assistant]]> Leddy Group is looking for a Machine Line Assistant for a client in Hampton, NH. With little supervision, this roll sets up, operates and performs routine maintenance on 3 retails machines. These machines include Lectra, Lectra spreader, Panel cutter, Folding machine, Bolter, Packaging line and Wrapping machine etc.  This role also keeps necessary records, reports and inspects for quality.

Pay is $11 an hour. 1st shift opportunities available. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Assistant]]> Leddy Group is looking for a Machine Assistant for a client in Hampton, NH. With little supervision, the employee sets up, operates and performs routine maintenance on 3 retails machines. These machines include Lectra, Lectra spreader, Panel cutter, Folding machine, Bolter, Packaging line and Wrapping machine etc. This position also keeps necessary records, reports and inspects for quality.

Pay is $10/hr,  1st shift opportunities available. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Automation Technician]]> Leddy Group is seeking a Automation Technician in Bethel, VT.   This position is responsible for the set-up, start-up, change-over, quality inspections and basic preventative maintenance associated with automated assembly cells, various integrated automated post molding operations, and automated insert molding cells. 

This is a Direct Hire opportunity for our client. The successful candidate will have a high attention to detail, good performance record and demonstrated initiative as well as mechanical aptitude and dexterity.  

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Manufacturing Quality Technician]]> Leddy Group is seeking a Manufacturing Quality Technician in South Royalton, VT.   This position is responsible for performing and documenting ongoing inspections on assigned molding machines. 

This is an entry level role, candidates must have a high attention to detail, be able to lift up to 50lbs and be able to stand for the entire shift. 

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[1st Shift Mold Maker]]> Leddy Group is seeking candidates for a Mold Maker in Hudson, NH. This is an exciting long term, permanent opportunity. 

The successful candidate would be responsible for constructing, reworking, maintaining, and repairing molds with minimal supervision. This candidate should be able to operate most tool room machinery and have the ability to work self-paced to meet timelines and can think through issues with minimal instruction. To perform this job successfully, the individual must be able to perform the requirements listed below, which are representative of the knowledge, skill, and/or ability required.

Specific requirements:

  • Assemble and dis-assemble molds; analyze and solve basic mold problems including flashing conditions, galling, venting, cooling problems, etc.
  • Assemble, repair, inspect, clean and polish molds.
  • Understand the operation of an injection mold. Recommend manufacturing methods, support / assist in mold design
  • Layout, fabricate and assemble molds while planning the machine tooling and fixtures required by analyzing blueprints, sketches, models and engineering or shop specification.
  • Use a variety of machinist's hand tools and precision measuring instruments.
  • Set up and operate machines in tool room – CNC mills machining centers, EDM wire and Ram/Sinkers, lathe, Bridgeport’s / Prototraks, and grinders.
  • Program CNC equipment using SurfCam CAM software. Training is available for the right candidate.
  • Analyze solid models mold designs for dimensions and for use during the manufacturing process.
  • Perform mold changes & modifications with minimal supervision.
  • Perform precision work to exacting tolerances and dimensions.
  • Solve problems relating to unusual material, work-holding arrangements, machine settings, fabrication methods, and production process.
  • Monitor and verifies quality in accordance with statistical process or other control procedures.
  • Maintains work area in a neat and orderly condition.
  • Supports all company safety and quality programs and initiatives
  • Troubleshooting of minor problems with tooling and production.

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Machinist Programmer]]> Leddy Group is currently seeking candidates for a CNC Machinist Programmer role in Hudson, NH. This is an exciting long term, permanent opportunity for the right candidate. 

The successful candidate would be responsible for programming, sets ups and operating CNC machining centers utilizing CAM software to generate machine code to cut to print or geometry specifications. Candidate should be able to work with a minimal amount of supervision and be able to setup and program multiple machining centers.

This candidate should be able to operate most machinery and have the ability to work self-paced to meet timelines and can think through issues with minimal instruction. To perform this job successfully, the individual must be able to perform the requirements listed below, which are representative of the knowledge, skill, and/or ability required.

Specific requirements:

  • Creates and or reviews setup sheet and specifications to determine best setup procedure, machining sequence, and quality requirements.
  • Notifies CNC Supervisor of discrepancies and or challenges.
  • Assembles cutting tools in tool holders and positions tool holders in machine spindles as specified, using hand tools, or insert cutting tools in specified machine magazines.
  • Basic familiarity with machine controls including Fanuc, Haas and Heidenhain and the ability to import and run programs from a database.
  • Monitors machine operations for program optimization.
  • Measures work piece for conformance to specification, using measuring instruments, such as micrometers, dial indicators, gauges, and Renishaw probe on the CNC machining centers.
  • Adjusts machine feeds and speeds, and change cutters to machine parts according to specifications.
  • Machines materials other than metal, such as composites, plastic, and rubber.
  • Inspects and measures parts to maintain statistical process control charts. Documents results on proper inspection forms.
  • Analyzes drawing, sketches, and design data of parts, tools, gages, molds, dies and fixtures to determine dimension and configuration of cuts.
  • Prepares instruction sheets and cutter lists to guide setup and operation of machine.
  • Compares encoded computer printout with original program sheet to assure accuracy of machine instructions.
  • Revises program to eliminate instruction errors or omissions.
  • Communicates with CNC Supervisor and team members to receive instructions and coordinate activities.
  • The candidate will be responsible for running a variety of machining centers such as; 5 axis, 3 axis and mill turning centers.
  • Maintain a clean and safe work area.
  • Perform all other duties as assigned.

Qualifications/Skill Requirements/Education:

  • Training and Experience: Between two and four years of trade school, vocational education, and five to seven years of work experience, or equivalent combination of education and experience
  • Must have detailed knowledge of CAD/CAM systems such as SurfCam, MasterCam, HyperMill and Partmaker Lathe software. The ability to modify G code is a plus.

EDUCATION and/or EXPERIENCE

Associate's degree (A. A.) or equivalent from two-year College or technical school; or three to four years of related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively among employees for organizational reasons.

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Cookie Production Worker]]> Leddy Group has partnered with Westminster Cracker to staff their new cookie company! This is an exciting direct hire opportunity that offers a generous benefit package. We are looking to staff the following positions: 

  • 1st Shift Production (multiple openings)
  • 2nd Shift Production (multiple openings) 
  • 1st Shift Mixer 
  • 2nd Shift Mixer
  • Sanitation Associate 
  • Quality Assurance Lab Analyst (floating shifts between 1st and 2nd) 

All inquiries must go through Leddy Group, Westminster Cracker will not accept phone calls or inquiries. 

To apply, please call Leddy Group 802-786-2222, email Rutland@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Cafeteria Staff]]> Leddy Group is currently seeking Cafeteria Staff to work for a reputable higher educational institution in Hanover, NH.  Flexible Schedule, evenings and weekend availability for both Part and Full time schedules.  Starting pay is $13/hr.

Candidates must be able to stand for 8 hours, lift up to 25lbs, should be dependable, well mannered, hardworking and be able to work independently.

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.to apply.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Paralegal/Legal Assistant]]> Leddy Group is looking for an experienced full time Paralegal/Legal Assistant for a litigation/employment Attorney. Qualified applicants should have legal experience with complex cases in litigation and/or employment law. Applicant must also have excellent language and organizational skills. Electronic filing experience also a plus.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Accounting Clerk]]> Leddy Group is looking for an Accounting Clerk to join our client's 100% employee-owned company In Proctor, VT.  This position  is responsible for payable and receivable accounts, ensuring that invoices and payments are accurate and that proper accounting procedures are followed.

Summary of Duties

  • Maintain vendor file records and transactions
  • Prepare deposits, enter cash receipts, and process credit card payments
  • Enter payables transactions
  • Generate and mail checks
  • Research and resolve vendor/customer inquiries or payment discrepancies via telephone and written correspondence (email)
  • Input records into electronic (paperless) filing system
  • Communicate with multiple divisions and management regarding receivers and purchases
  • Assist in month / annual period closings
  • Other duties as assigned

The successful candidate will have broad knowledge in accounting processes and procedures, including debits/credits, accounting codes, and financial statements. Experience with multi-company transactions is preferred. Previous inventory and credit/collections experience are a plus.

Strong communication skills, high attention to detail and accuracy, and the ability to work independently and meet deadlines are required. Must be proficient in Microsoft Office Suite (excel spreadsheets) and computerized accounting software.

To apply for this position, please email rutland@leddygroup.com, call 802-786-2222 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Janitor]]> Leddy Group is currently seeking experienced Janitorial candidates for a client in Merrimack, NH. This role will involve dry mopping, vacuuming, and sweeping areas inside a manufacturing building. Applicants should have at least 1 year of experience with buffing, waxing, and stripping of floors.

This is a 1st shift full-time, long term role for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Line Cook]]> Leddy Group is currently seeking Line Cooks to work for a reputable higher educational institution in Hanover, NH.  Flexible Schedule, evenings and weekend availability for both Part and Full time schedules.  Starting pay is $13/hr.

Candidates must be able to stand for 8 hours, lift up to 25lbs, should be dependable, well mannered, hardworking and be able to work independently.

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.to apply.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Dishwashers]]> Leddy Group is currently seeking Dishwashers to work for a reputable higher educational institution in Hanover, NH.  Flexible Schedule, evenings and weekend availability for both Part and Full time schedules.  Starting pay is $13/hr.

Candidates must be able to stand for 8 hours, lift up to 25lbs, should be dependable, well mannered, hardworking and be able to work independently.

Contact Leddy Group at lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.to apply.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Clerk (3rd Shift)]]> Leddy Group is seeking a 3rd shift Warehouse Clerk in Rutland, VT. Position includes performing inventory counts on boxes, packaging and bringing supplies to warehouse shipping area. 
 
Candidates should have good hand-eye coordination, good manual dexterity, and be dependable. 
 
Contact Leddy Group to apply.  Email rutland@leddygroup.com, call us at 802-786-2222 or visit www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Sanitation Staff]]> Leddy Group is seeking a 3rd shift Sanitation Staff member in Monroe, NH.  Position includes spraying and cleaning equipment, sanitizing, working in wet conditions.

Candidates should be dependable, hardworking, and be able to follow directions.  Candidates should be able to lift up to 50lbs and be able to keep up with production goals. 

Candidates must be at least 18 and have one year of solid work experience. 

Contact Leddy Group to apply.  Email lebanon@leddygroup.com, call 603-727-0102  or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Blow Molding Operator]]> Direct Hire entry level opportunity!

Leddy Group is seeking a 3rd Shift Blow Molding Operator in Somersworth, NH. Position will include assisting operating of 3D blow molding machines, material preparation and coupling station configuration. The hours are 6:00 PM to 6:00 AM, 3 days per week, then 4 days per week rotating schedule. The rate of pay is $13.20 per hour. 

Candidates should have good knowledge of SAP and MS Office, 3 years of experience,  and good problem solving skills. 

Contact Leddy Group to apply.  Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Brentwood, NH

Currently seeking motivated individuals who can work 12 hour shifts standing. This position is for Thursday, Friday, Saturday and alternating Wednesdays from 6pm-6am. The shift includes a 30 min unpaid lunch break and two 15 min breaks.

Responsibilities of the Production Worker:

  • Reloading machinery
  • Heavy lifting throughout the shift

Requirements of the Production Worker:

  • Ability to lift up to 50 pounds individually, more with assistance
  • Construction or production background is helpful
  • Steel toe boots
  • Ability to pass a criminal background check and drug screen

Compensation for this position is $13.92/hr.

Contact the Leddy Group to apply. Call 603-749-4810, email seacoast@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Associate]]> Leddy Group is seeking a Production Associate in the Middlebury, VT area.  This position will include making and bottling product, boxing, and packaging.

Candidates should have a good work ethic, be able to follow directions, and be self directed.  Candidates must be able to lift up to 50lbs, have basic math and reading skills, and be reliable.  Position works 8AM-4:30PM. 

Contact Leddy Group to apply.  Email resumes to rutland@leddygroup.com, call 802-786-2222 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Assembler (3rd Shift)]]> Entry level Direct Hire opportunity!

Leddy Group is looking for a 3rd shift assembler for a company in Somersworth, NH. Duties include assembly of products, removal of excess material from products, following blue print instructions, addition to assembled parts and accurate recording of production numbers.

Pay is $13.20/hr. 3rd shift opportunities available.

To apply please go to leddygroup.com or send resumes to seacoast@leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Quality Inspector (3rd Shift)]]> Entry level Direct Hire opportunity!

Leddy Group is seeking a 3rd shift Quality Inspector in Somerworth, NH. The chosen candidate will monitor and inspect areas for adherence and enforcement of Standard Operating Procedures (SOPs) and Good Manufacturing Practices (cGMPs). Candidate is also responsible for adhering to the SOPs and cGMPs that are in effect assuring the quality and quantity of product produced.

Applicants must have mechanical inspection experience, and experience using inspection tools. Applicants should have solid verbal and written English communication skills, familiarity with Microsoft Word and Excel, basic math skills. Knowledge of ISO 9001:2008 and SAP are preferred.

The pay for this position is $13.86/hour. The hours are Sunday - Thursday from 11:00 pm - 7:00 am.

Interested applicants may email a resume to seacoast@leddygroup.com, visit www.leddygroup.com, or call 603-749-4810 to apply.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Personal Banker]]> Leddy Group is seeking a Personal Banker in Norwich, VT. Candidates must have excellent attention to detail as well as customer service skills. Must have strong typing and computer skills as well as interpersonal skills and the ability to maintain confidentiality and privacy.

Contact Leddy Group to apply at 603-727-0102. Email lebanon@ leddygroup.com or visit www.leddygroup.com

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Teller]]> Leddy Group is seeking a Teller in Lebanon, NH. Candidates must have excellent attention to detail as well as customer service skills. Must have strong typing and computer skills as well as interpersonal skills and the ability to maintain confidentiality and privacy.

Contact Leddy Group to apply at 603-727-0102. Email lebanon@ leddygroup.com or visit www.leddygroup.com

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Senior Teller]]> Leddy Group is seeking a Senior Teller in Lebanon, NH. Candidates must have excellent attention to detail as well as customer service skills. Must have strong typing and computer skills as well as interpersonal skills and the ability to maintain confidentiality and privacy.

The successful candidate will have 2 years of teller experience as well as a thorough understanding of operational procedures gained through several years of operational experience. 

Contact Leddy Group to apply at 603-727-0102. Email lebanon@ leddygroup.com or visit www.leddygroup.com

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Industrial Mechanic Technician]]> Leddy Group is looking for an Industrial Mechanic Technician in Portsmouth, NH. 

This position performs routine and preventative maintenance, servicing and repairs on food processing and packaging equipment. This is a 2nd shift position that works 3:00 pm to 11:30 pm.  

We are seeking a candidate with 3 or more years of experience working with mechanical, electrical, pneumatic and hydraulic system repairs.  There are some light administrative duties required as well. 

To apply please send your resume to Seacoast@LeddyGroup.com, call 603-749-4810 or visit www.leddygroup.com to be prescreened immediately for this position. 

 

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Refrigeration Technician]]> Leddy Group is looking for an experienced Refrigeration Technician for a full time position in Portsmouth, NH. Duties include providing planned maintenance of equipment including ammonia compressors, air compressors, boilers, electrical controls, pumps, fans and HVAC equipment, perform inspections, assist with projects, maintain, test and inspect all plant fire prevention and emergency response systems and equipment, and assist with general building maintenance as required.

The right candidate will have 3+ years of HVAC and refrigeration experience, preferably with ammonia-based systems, have a passion for all things maintenance and have knowledge and understanding of both scheduling preventative maintenance and responding to issues that arise.

Pay is dependent upon experience. To apply, please send resumes to seacoast@leddygroup.com, call 603-749-4810 or apply at leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Tool & Die Maker]]> Leddy Group Dover is looking for an experienced Tool & Die Maker for a company in Rochester, NH. This position will be responsible for making fixtures, repairing and setting up dies and making tooling needed for daily production. 

The right candidate will have experience with a variety of machining lathes, bridge ports, surface grinders and jib bores. Some experience in CNC machining required. The right candidate will also be familiar with micrometers, snap gauges or other tools for dimensional evaluation. 

This is a 1st shift position.To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Maintenance Technician]]> Leddy Group is seeking a Maintenance Technician in Rochester, NH.

Qualified candidates must have electrical experience, mechanical, PLC programming and manufacturing background. Plumbing experience is a plus. This position works a rotating schedule, some Saturdays many be required The pay rate is $15-20 per hour DOE.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit  www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Senior Programmer/Analyst]]> Leddy Group is seeking a Senior Programmer/Analyst for our client in Lisbon, NH. This position would be overseeing the design and development of IT databases and related master files. Responsible for ensuring the performance integrity and quality of the databases as well as training users on application use. 

Successful candidates will have prior programming/analyst experience as well as a high attention to detail, communication and collaboration skills. 

Contact Leddy Group to apply at 603-727-0102, send resumes to lebanon@leddygroup.com or apply online at www.leddygroup.com!

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Cable Assembler]]>

Exeter, NH

Currently seeking candidates in the Exeter area who has some experience in soldering, hand fabrication and cable assembly experience! This is a full time, Monday through Friday position. Hours are somewhat flexible, 8 hours during the time frame of 7am-5pm with a 30 min unpaid lunch.

Responsibilities of the Cable Assembler:

  • Assembling and manufacturing cable assemblies

Requirements of the Cable Assembler:

  • Ability to read and interpret written and verbal instructions as well as understand how to interpret cable assembly drawings and bill s of material
  • Measuring and counting skills
  • Ability to read a ruler
  • Attention to detail
  • Needs to be accountable and dependable

Compensation for this position is $12.00/hr.

 
Contact the Leddy Group to apply. Call 603-749-4810 or seacoast@leddygroup.com or apply online at www.leddygroup.com. 

 

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Network/Systems Administrator]]> Leddy Group is seeking an experienced Network/Systems Administrator for our client in Lebanon, NH. Candidates should be detail oriented and a team player to lead the Information Technology team. 

Applicants should have proven knowledge and skills of/with

o Windows OS Systems— Desktop and Server

o LAN Networking— including Switches, Routers and related infrastructure

o VPN management

o Microsoft SharePoint

o Database administration (MS SQL, Access)

o Virtualization

Experience with ERP and Financial software packages; Crystal Reports; Visual Studio preferred.  

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Packager]]> Leddy Group is seeking an individual for a short-term Packaging position in the Springfield, VT area.  Position includes packing racks and floor stands and packaging them for shipment. 

Candidates should be focused, motivated and a team player. Position works 6:00 am-4:30 pm.  

Contact the Leddy Group to apply.  Email lebanon@leddygroup.com, call 603-727-0102  or visit www.leddygroup.com

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator]]> Leddy Group is seeking a Machine Operator to load, run and unload retainers in Lebanon, NH.  Interested candidates must be able to stand for long periods of time doing repetitive tasks and lifting up to 30 lbs occasionally.  

Successful candidates will have strong attention to detail, be reliable and ideally possess some manufacturing experience. This is a 2nd shift opportunity to get your foot in the door with an excellent manufacturing company. 

Interested candidates can apply by emailing a resume to Lebanon@leddygroup.com, calling 603-727-0102 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Maintenance Manager]]> Leddy Group is currently seeking an experienced Maintenance Manager for a client in Goffstown, NH. This client is in growth mode and looking to add to their team in a full-time capacity. The Maintenance Manager would be responsible for troubleshooting high powered machines and working with the maintenance team to resolve issues.

This role would require someone with at least 4 years of industrial maintenance experience. Applicants who have experience with furnaces are desired. This is a full-time, salaried role for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[White Room/Assembly Technician]]> Leddy Group is seeking White Room/Assembly Technicians in Lebanon, NH. This is a great opportunity to get your foot in the door of an advanced manufacturing company. Positions available on 1st and 2nd shift starting immediately.  Must be able to stand for an 8-hour shift, lift up to 30lbs and demonstrate reliability and a great attitude. 2nd Shift Opportunity.  

The successful candidate will have prior relevant experience, will not have a violent or drug related criminal history and be able to pass drug testing.  

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Shipping Associate]]> Leddy Group is seeking a Shipping Associate in Middlebury, VT.  Position will include pick/pack, boxing, and packaging of product. 

Candidates should have a good work ethic, as well as being highly organized, able to follow directions, detail oriented, reliable and self directed. Candidates must be able to lift up to 50lbs, and have basic math, computer, and reading skills.  Position works 8:00 am - 4:00 pm.

Contact Leddy Group to apply.  Email resumes to rutland@leddygroup.com, call 802-786-2222  or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Saw Helper]]> Leddy Group is seeking a Saw Helper in the Extrusion Department in the Franklin, NH area. This position will involve lifting up to 50lbs, standing and moving around all shift, and working with a team to get the work done.

Candidates should have previous experience in a manufacturing environment with solid math skills and working knowledge of measuring tools. Ability to use a computer is a must. Blueprint experience a definite plus.

This is a full-time position and will result in permanent placement for the right fit. Steel toed boots and drug screening required.

If interested, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Packer (2nd Shift)]]> Leddy Group is seeking a hardworking 2nd Shift Packer in Franklin, NH.  Position will include packing products in teams.  

Candidates must be dependable, able to lift up to 50lbs, be able to work at a quick pace, and be a team player.

Position works 3PM-11PM and overtime is required as needed. Drug screening and steel toed boots required. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Machine Operator]]> Leddy Group is seeking experienced Swiss CNC Machine Operators who want to join a growing team!

Major Responsibilities:

  • Run production in an efficient manner
  • Ensure a DPPM of less than 1,250
  • Keep a tidy and organized work area
  • Follow all Safety Rules and Guidelines
  • Follow all guidelines within the Handbook
  • Be dependable and accountable
  • Communicate accurately and honestly in an open, candid, and respectful manner at all times

Skills / Qualifications / Requirements

Production

  • Operate 2-4 machines simultaneously
  • Load material into bar feeders when necessary
  • Determine when inserts need to be changed
  • Change inserts and various tooling in a timely fashion with little to no supervision
  • Follow verbal instruction
  • Have a basic understanding of hand tools
  • Tray parts to protect from damage
  • Report any unusual sights or sounds to your supervisor
  • Proficient with controls on various machines

Quality

  • Ability to use basic measuring tools (Micrometers, Verniers, drop indicators, plug gages, ring gages, pin gages, and thread gages)
  • Follow established quality policies
  • Accurately fill in data for the Quality Assurance (“QA”) Sheet and verify completeness based on part print
  • Accurately report the number of good parts made per shift as well as scrap per shift
  • Identify and resolve product defects
  • Report defects to your supervisor immediately

Maintenance

  • Clean or replace screens, traps, and filters when necessary
  • Remove chips from the machine
  • Wipe down machines, mop work area, and report machine leaks to your supervisor
  • Follow good housekeeping and take proper care of equipment and tooling
  • Remove bar remnants
  • Ability to disassemble, clean, and reassemble guide bushings, collets and sub spindle components
  • Check machine oil levels (cutting fluids, way lube, and bar feeder oil)
  • Troubleshoot bar feeder issues that may arise

Physical Requirements

  • Lifting, carrying and pushing heavy objects
  • Twisting and bending
  • Standing for long periods of time
  • Ability to see clearly

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Machine Operator]]> Leddy Group is seeking experienced Swiss CNC Machine Operators who want to join a growing team!

Major Responsibilities:

  • Run production in an efficient manner
  • Ensure a DPPM of less than 1,250
  • Keep a tidy and organized work area
  • Follow all Safety Rules and Guidelines
  • Follow all guidelines within the Handbook
  • Be dependable and accountable
  • Communicate accurately and honestly in an open, candid, and respectful manner at all times

Skills / Qualifications / Requirements

Production

  • Operate 2-4 machines simultaneously
  • Load material into bar feeders when necessary
  • Determine when inserts need to be changed
  • Change inserts and various tooling in a timely fashion with little to no supervision
  • Follow verbal instruction
  • Have a basic understanding of hand tools
  • Tray parts to protect from damage
  • Report any unusual sights or sounds to your supervisor
  • Proficient with controls on various machines

Quality

  • Ability to use basic measuring tools (Micrometers, Verniers, drop indicators, plug gages, ring gages, pin gages, and thread gages)
  • Follow established quality policies
  • Accurately fill in data for the Quality Assurance (“QA”) Sheet and verify completeness based on part print
  • Accurately report the number of good parts made per shift as well as scrap per shift
  • Identify and resolve product defects
  • Report defects to your supervisor immediately

Maintenance

  • Clean or replace screens, traps, and filters when necessary
  • Remove chips from the machine
  • Wipe down machines, mop work area, and report machine leaks to your supervisor
  • Follow good housekeeping and take proper care of equipment and tooling
  • Remove bar remnants
  • Ability to disassemble, clean, and reassemble guide bushings, collets and sub spindle components
  • Check machine oil levels (cutting fluids, way lube, and bar feeder oil)
  • Troubleshoot bar feeder issues that may arise

Physical Requirements

  • Lifting, carrying and pushing heavy objects
  • Twisting and bending
  • Standing for long periods of time
  • Ability to see clearly

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Leddy Group has partnered with Westminster Cracker to staff their new cookie company! This is an exciting direct hire opportunity that offers a generous benefit package. We are looking to staff the following positions: 

  • 2nd Shift Production (multiple openings)
  • 3rd Shift Production (multiple openings) 

All inquiries must go through Leddy Group, Westminster Cracker will not accept phone calls or inquiries. 

To apply, please call Leddy Group 802-786-2222, email Rutland@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Window Installer]]> Leddy Group is seeking candidates to fulfill an immediate opening for a Window Installer! This is a long term, permanent opportunity for the right candidate. This position will include general labor duties, assembling and installing windows.

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Quality Control Inspector]]> Leddy Group is actively seeking an experienced Quality Control Inspector on 3rd shift for a client in Wilton, NH. 

Experience working as an inspector is a must. Must read/write English, must have a basic understanding of Math. Preferred work inspecting injection molded parts or parts that have been machined. Experience using a CMM preferred. Must have familiarity with drop gauge, calipers, micrometers, gauges etc. Must know how to read blue prints. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Mechanical Operator]]> Leddy Group is now hiring a Level 1 Mechanical Operator to work on testing and repairing the products that our customers assemble and service. Job duties include testing, cleaning, refurbishment and preventative maintenance on mechanical and electronic equipment including but not limited to printers, scanners, monitors/displays, LCD's, Keyboards, PC's, servers, point of sale systems and peripherals and service parts using company procedures. 

Candidates should have strong attention to detail, have a general mechanical understanding, and general mechanical knowledge of repair and manufacturing assembly. 

To apply, contact Leddy Group.  Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Weigher/Packer]]> Leddy Group is looking for a Weigher/Packer for a food processing facility in Portsmouth, NH. This position is responsible for duties as assigned while performing a variety of functions in the packaging area of the production department.  Those duties may include case packing, carton packing, inspecting, check weighing, labeling, box making, palletizing, and reworking product.  The tasks will entail the use of standard packing machinery and procedures to pack and box various finished goods in cartons, bags, or containers.

3rd shift available. Pay is $12.50/hr with a $.50 differential. 

If interested, please send resumes to seacoast@leddygroup.com, call 603-749-4810 or apply at leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Winding Technician ]]> We are currently seeking a Wire Assembly/Winding Technician in Somersworth! Interested candidates should have experience in wire winding or wire assembly and possibly some electronic test equipment operations. If candidates have lean manufacturing experience or cable assembly, that is a huge plus! This opportunity is a first shift position Monday through Thursday 7am-5pm, with the possibility of overtime on Friday if work permits. Compensation for this position is $11-$12/hr based on experience.

Responsibilities of the Winding Technician:

  • Learn visual, mechanical and electrical inspection techniques per QC/QA requirements.

  • Learn & implement process documentation consistent with production responsibilities.

  • Maintain time records, logs, lot travelers and production records consistent with QC/QA requirements.

  • Proper operation of machinery and equipment used in the manufacturing process such as scales, fixtures, ovens, vacuum equipment, microscopes, height indicators, Vernier’s, micrometers, mechanical test stations, magnetic test stations, volume measurement, thermocouples, winding machines, desiccators and environmental & electrical test equipment such as spectrum analyzers, oscilloscopes, DMM's, induction bridges, signal generators and specialty work stations.

Requirements of the Winding Technician:

  • Must have good manual dexterity for dealing with fine wire

  • Microscope experience

  • Mechanical and electrical inspection techniques

  • 1 year in a manufacturing environment - past experience with detailed work

  • Must pass drug screen

Contact Leddy Group to apply. Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Controller]]> Leddy Group is seeking a Controller for our not for profit client. Responsibilities include overseeing general ledger accounting including monthly and annual closings, A/P & A/R, management & leadership of department personnel, federal and state compliance reporting, oversight of annual financial statement and A-133 audit, budget development, management of Medicaid waiver budgets, facilities management, and development of capital budget.

CPA is not required but is a plus. Qualified candidates will be highly motivated, dedicated, and committed to promoting a culture of teamwork. A bachelor's degree in Finance or Accounting plus a minimum of seven (7) years of related experience is a must.

To apply, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com or visit our website www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator]]> Leddy Group is seeing a Machine Operator in North Berwick, ME. This position will make seating and bleachers for well known and established manufacturing company. This position requires high attention to detail, strong interpersonal skills to work in a team environment and dependability.

Experience in a manufacturing environment or similar is highly preferred.  1st shift available. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Associate]]> Leddy Group is looking for a  Warehouse Associate for a client in Exeter, NH. Cycle count experience preferred.

Candidates must be able to pass a criminal background check.

Pay is $12/hr and 1st shift is available.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Manufacturing Worker]]> Leddy Group is seeking Entry Level Manufacturing Workers in Lebanon, NH. This is a great opportunity to get foot in the door of advanced manufacturing company.  Positions available on 1st and 2nd shift starting immediately including machine operation, unpacking and more.  Must be able to stand for an 8 hour shift, lift up to 30lbs and demonstrate reliability and a great attitude.  All resumes will be considered. 

Candidates must not have violent or drug related criminal histories and must pass drug testing.  Pay starts at $13/hour. 

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electronics Component Technician]]> Leddy Group is looking for an Electronics Components Technician near Dover, NH. This is a great career move to get into a company that is an innovator of semiconductors & electronic components.

This is a first shift position and requires candidates with high degree of hand dexterity and high level of attention to details.  Must be able to follow and interpret written instructions and communicate all issues when they arise. 

Entry level positions start at $10.50/hour but company will pay more for experience in this field. Company offers great benefits including medical, dental, vision, vacation, holiday pay and 401k plan.   

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Accounts Payable Associate]]> Leddy Group is seeking candidates to fulfill an Accounts Payable Associate in Bedford, NH. 

PRIMARY RESPONSIBILITIES

Responsible for Accounts Payable for the Company. Applies strong organizational skills to prioritize tasks and ensure timely workflow. Uses PC computer skills in a network-based automated accounting environment. Employs effective communication skills in supporting other departments and in interacting with vendors.

DESCRIPTION

 - Responsible for the processing, vouchering and posting of vendor invoices into the accounts payable system.

 - Responsible for the processing of the weekly A/P check runs, including matching checks to invoices.

 - Responsible for maintaining all invoices after the invoices have been paid prior to being sent out for scanning, ensuring that all documentation is submitted for offsite scanning.

 - Prepares all checks and related backup for signoff; including manual checks as required.

 - Reconciles vendor statements to account balances and reconciles the subsidiary ledger to the general ledger. Determines which vendors and the related invoices should be paid in order to take advantage of cash discounts. Prints all checks and makes copies of them to attach to backup.

 - Responsible for collecting, reviewing, and entering employee expense reports for re-imbursement through payroll (done bi-weekly).

 - Assists other departments in researching discrepancies, etc.

 - Resolves all vendor inquiries.

 - Reviews and challenges all invoices that appear unusual (excessive freight charges, one-time set-up fees, etc.). Monitors and researches the unvouchered account to ensure that items are cleared timely.

 - Prepares all monthly accruals for invoices received after month end.

 - At each quarter and year-end, ensures that a proper cutoff is achieved so that the general ledger is properly updated.

 - Responsible for the applicable portion of the monthly and quarterly report pack.

 - Responsible for reconciliation of various General Ledger accounts.

 - Responsible for the preparation of appropriate documentation as required by J-Sox.

 - Must be able to provide coverage for Accounts Receivable if required.

 - Provides assistance to the cost accountant

 - Other duties as assigned.

QUALIFICATIONS

Minimum:

 - H.S. diploma or equivalent plus 5 years experience; A.S. plus 3 years experience

 - Proficient in Windows-based PC software packages including Excel and Word, etc.

 - Good interpersonal and analytical skills

 - Good communication skills, both verbal and written

 - Ability to maintain strict confidentiality

 - Ability to prioritize multiple projects and work independently

 - Attention to detail

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Accounts Receivable Specialist]]> Leddy Group is currently seeking candidates to fulfill an Accounts Receivable Associate in Bedford, NH! 

Primary Responsibilities

Responsible for the integrity of Accounts Receivable for the Company. Applies strong organizational skills to prioritize tasks and ensure timely workflow. Uses PC computer skills in a network-based automated accounting environment. Employs effective communication skills in supporting other departments and in interacting with customers. Reports to the Accounting Manager.
 
DESCRIPTION
 
Level I
  • Prepares all customer invoices and ensures timely mailing daily.
  • Applies all cash payments to the proper accounts daily.
  • Monitors payment status of all accounts and calls customers regarding past due balances daily.
  • Prepares approved credit memos.
  • Reviews customer account balances and researches and resolves discrepancies.
  • Monitors credit limits to ensure appropriateness and to minimize exposure to company.
  • Resolves customer inquiries timely.
  • Assists in the tracking, updating, and filing of customers’ resales certificates.
  • Responsible for filing of customer invoices.
  • Responsible for auditing daily shipments.
  • Responsible for preparation and distribution of the performance report daily.
  • Responsible for the preparation of appropriate documentation as required by J-Sox.
  • Releases and manages sales order per Accounting policy.
  • Other duties as assigned.
Level II
  • Meets level I requirements.
  • Monitors credit limits to ensure appropriateness and to minimize exposure to the Company.
  • Responsible for the preparation of all weekly and monthly reports.
  • Prepares monthly account reconciliations.
  • Performs credit research on new customers and recommends appropriate terms for customer.
  • Determines when customers should be placed on credit hold; when product should subsequently be released; and new payment terms assigned, if a change is necessary.
  • At each month, quarter and year-end, ensures that a proper cutoff is achieved so that revenue and related accounts are properly recognized and recorded.
  • Responsible for the applicable portion of the monthly and quarterly reporting packages.
  • Responsible for reconciliation of various General Ledger accounts as required.
  • Must be able to provide coverage for Accounts Receivable Associate, if required.
  • Preparation of CA sales and use tax filing.
  • Responsible for the integrity of resale certificates.
  • Responsible for the accuracy and completeness of AR Agings, Bad Debt Reserve, and Customer Deposits.
  • Assesses Accounts Receivable processes and procedures for areas of improvement.
  • Releases and manages sales orders per Accounting policy.
  • Other duties as assigned.

QUALIFICATIONS

Minimum:
  • H.S. diploma or equivalent plus 5 years experience; A.S. plus 3 years experience.
  • Strong working knowledge of Incoterms.
  • Proficient in Windows-based PC software packages including Excel and Word, etc.
  • Good interpersonal and analytical skills
  • Good communication skills, both verbal and written
  • Ability to maintain strict confidentiality
  • Ability to prioritize multiple projects and work independently
  • Attention to detail

Desired:

Experience with Oracle business software 

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production/Packaging/Shipping Associate]]> Leddy Group is seeking a versatile Production, Packaging, and Shipping Associate in the Middlebury, VT area.  This position will include making and bottling product, boxing, and packaging, and preparing orders for shipment.

Candidates should have a good work ethic, be able to follow directions, and be self directed.  Candidates must be able to lift up to 50lbs, have basic math and reading skills, and be reliable.  Position works 8AM-4:30PM. 

Contact Leddy Group to apply.  Email resumes to rutland@leddygroup.com, call 802-786-2222 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Packaging Room Operator]]> Leddy Group is currently seeking a Packaging Room Operator for a client in Moultonborough, NH that has been in business for over 25 years.

This role will include quality inspection of raw materials and finished product, performing packaging operations, sorting out defects, and other general production responsibilities.

Applicants should have at least 1 year of machine operating or packaging experience in a manufacturing environment. High School Diploma or equivalent required.

This is a first shift, full-time, long term role for the right candidate.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Plant Engineer Apprentice]]> Leddy Group is looking for a Plant Engineer Apprentice in the Middlebury, VT area. This position will deal with plant equipment. 

Applicants should have machine maintenance and fabrication experience as well as a good understanding of how products and projects work.

Willing to train the right candidate who has the raw talent and skill set for this position. 

If you are interested, please email rutland@leddygroup.com, call 802-786-2222 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[General Maintenance Worker]]> Leddy Group is looking for a General Maintenance Worker in Portsmouth, NH. 

This is a temporary position to assist our client's Maintenance Department with odd jobs such as:

  • building cubicles
  • taking cubicles down
  • light painting
  • light landscaping.  

This temporary position does have opportunity to grow into a permanent role.

Candidates for the General Maintenance Worker must be comfortable standing and lifting up to 50 pounds.

Position does require a criminal background check. 

Schedule is Monday through Friday 7am-4pm.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator (1st Shift)]]> Currently seeking reliable candidates to fill a supplemental-direct role at a client in Kittery, ME.

Responsibilities of the Machine Operator:

  • Operate one or several production machines simultaneously.
  • Inspect parts completing SPC charts and note any trends indicating potential problems.  Report defective parts to lead person or setup and operate personnel.
  • When required, make simple machine adjustments to correct problems, referring more complex problems to either setup and operate person or lead person.  Ensure adequate supply of correct material is at machines to satisfy production requirements.
  • Maintain manufacturing order (MO) and pull card integrity by producing appropriate quantities in proper sequence of operations.
  • Ensure drawing and setup sheets are properly filed and maintained at point of use location. 

Requirements of the Machine Operator:

  • Certified and able to run Barrett
  • Must be able to read and understand drawings and blueprints as well as use of gaging methodology (verniers, drop gages, plug gages, etc)
  • Have machine operating experience

Candidates must be able to read and understand blueprints, be dependable, and be hard-working.  Qualified candidates will need to be able to pass a drug screen and background check. Openings on the 2nd shift working 3pm - 11:30pm; 1/2 hour unpaid lunch.  Compensation for this position is $14.00/hour.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electro-Mechanical Assembler]]> Leddy Group is seeking an Electro-Mechanical Assembler in Somersworth, NH. This role's responsibilities may include:

  • Magnet track assembly
  • Stacking and molding activities
  • Heavy mechanical assembly
  • Mixing resins & adhesives
  • Stacking, coating, honing & grinding
  • Mechanical inspections
  • Completing finished assemblies.
  • Winding machines
  • Machining Centers

The position works 1st shift Monday to Thursday; 7am-5pm. Pay rate is $12+/hour DOE.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Injection Mold Machine Operator]]> Leddy Group in the Derry, NH area is seeking an Injection Mold Machine Operator. Candidates should have at least 1 year of prior experience and the ability to run machines for injection molding plastics. Candidates must be dependable and be able to write, read, and speak English.

Position works Monday through Thursday, 6:00 pm-6:00 am. Position is supplemental with potential for growth.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Leddy Group is seeking a Production Worker in Dover, NH.  Candidates must have good manual dexterity, good math and measuring skills, and be dependable. 
 
Candidates should have good attention to detail and be able to keep up with production. 
 
Openings on 1st shift. 
 
Contact Leddy Group to apply.  Email seacoast@leddygroup.com, call 603-749-4810  or visit www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Assembly Technician]]> Leddy Group is seeking a Production/Assembly Technician in the Lebanon, NH area. Position will perform a variety of operations to produce quality products using various tools and equipment according to required specifications.

Candidates should have strong manual dexterity skills, ability to stand and walk for long periods of time, ability to lift up to 30lbs.  Candidates should be self-motivated, reliable and have the ability to complete fine detailed work. 

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Education Outreach Coordinator ]]> Leddy Group is seeking an Education Outreach Coordinator in Hanover, NH.  Position will include developing, promoting and implementing special projects, research and analysis as well as oversee, direct, develop and coordinate outreach activities. 

Candidates should have great customer, service, professionalism, strong attention to detail as well as a Bachelors degree in business, marketing or management or an equivalent combination or education and experience.

Contact Leddy Group to apply. Email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Shipping Associate]]> Leddy Group is currently seeking candidates for a 2nd shift shipping job right here in Rutland, VT. This position will require unloading inbound and loading outbound trucks, stacking and safe guarding all raw materials, picking and staging orders for shipping raw materials, generating shipping/receiving paperwork in SAP program. 

This is an exciting and long term opportunity for the right candidate, if you are interested, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Administrative Assistant]]> Leddy Group is seeking a Full-Time Administrative Assistant in Hartford, VT. Responsibilities will include assisting with office operations including scanning, filing and data entry. 

Candidates should be friendly, professional, and empathetic.  Strong administrative skills and comfort with computer systems are required.

Interested candidates can apply by emailing Lebanon@leddygroup.com, calling 603-727-0102 or visiting our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator (1st Shift)]]> Leddy Group is currently seeking an experienced Machine Operator for a client in Manchester, NH. This role will involve operating a variety of production machines, maintaining adjustments on these machines, and performing periodic checks on machines. 

Qualified candidates will have at least 1 year of previous machine operating experience.

This is a 1st shift, full time, long term opportunity for the right candidate. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Lab Technician (Metallography)]]> Leddy Group is seeking a Metallographic Lab Technician for a client in Goffstown, NH.

Candidates should be comfortable with the following Metallographic analyses and techniques:

- Sample preparation using cold and hot mount techniques
- Dicing, grinding and polishing
- Optical imaging
- Etching
- Mounting
- Grain size measurements
- Metallurgical Testing & Inspection
- Joining method evaluations

Candidates should also be familiar with completing micro-hardness measurements, Rockwell hardness measurements, and plating thickness measurements with XRF and optical microscopy.

This job requires a minimum of 2-5 years experience in a related field, as well as an Associates degree in a technical field. This is a part time, long term position.

Please send resumes to bedford@leddygroup.com, or call 603-666-4051 to apply.

You may also review our website, jobs.leddygroup.com to see a complete listing of all open jobs. We look forward to hearing from you!

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator]]> Calling all Machine Operators! 

Leddy Group is currently seeking candidates for an exciting machine operating opportunity in Salem, NH! We have positions available on both 1st and 2nd shift! 

We are looking for operators to run semi-automatic equipment. You’ll ensure the interminable and efficient running of production. A great machine operator is reliable and able to work with attention to detail and safety standards.

Responsibilities

  • Feed raw material or parts to semi-automated machines
  • Inspect parts with precision and measuring tools
  • Check output to spot any machine-related mistakes or flaws
  • Keep records of approved and defective units or final products
  • Maintain activity logs

Requirements

  • Proven experience as a machine operator
  • Understanding of production procedures
  • Adherence to health and safety regulations (e.g. use of protective gear)
  • Ability to read blueprints, schematics and manuals
  • Attention to detail
  • Knowledge of ESD (electro-static discharge) a plus
  • Teamwork and communication skills
  • High school diploma or equivalent

To apply, please call the Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Assembler]]> Leddy Group is seeking an Assembler for a client company in the Bethel, VT area. This position involves line work.
 
The Assembler will assemble aerosol products, pack and label boxes, keep materials in supply, load boxes onto skids, and assemble boxes.
 
Candidates should be able to keep up with production goals, be a team player, and be dependable. Position works Monday through Friday, 7AM-3:30PM. 
 
To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Assembler]]>

Currently seeking a candidate who can assemble equipment using blueprint specifications and parts lists. Interested candidates should be able to lift up to 50 pounds and sit or stand for the entire 8 hour shift. This is a first shift position from 6am-2:30pm with a 30 minute unpaid lunch. This position does require the candidate to pass a pre-employment drug screen. This position does require the use and knowledge of hand tools and is physical in nature as the position requires crouching and kneeling at times.

Responsibilities of the Assembler:

  • Positions parts and subassemblies by using templates or reading measurements. 
  • Assembles components by examining connections for correct fit; fastening parts and subassemblies. 
  • Verifies specifications by measuring completed component.
  • Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.
  • Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.

Requirements of the Assembler:

  • Ability to read blueprints
  • Ability to lift up to 50 pounds
  • Ability to stand for the entire shift
  • Prior experience in assembly
  • Ability to work in fast-paced manufacturing environment
  • Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies
  • Documents actions by completing production and quality forms.

The compensation for this position is $14/hour.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Receiver]]> Leddy Group is looking for hiring a Receiver for local Dover company.  The position of Receiver is responsible for the day to day operations of the receiving line, including customer specific systems and inventories. The Receiver verifies that product purchased and received is accurately identified and matches with paperwork.  This position also requires computer data entry and update of inventory system

Hours are Monday - Friday, 8am-4:30pm.   Must be able to lift up to 50lbs and have a high school education or GED is required. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Picker/Packer]]> Leddy Group is hiring a Picker/Packer for local Dover, NH company. Candidates must be able to lift up to 50lbs  High school Diploma or GED is required.

Position works Monday to Friday, 8am-4:30pm.  

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[General Laborer]]> Our client in Brandon, VT is seeking a reliable individual to stack wood for pallet production. This is a supplemental opportunity that will last for roughly two months.

Candidates must be reliable and prepared to work Monday through Friday from 7-3:30. Dependability is absolutely crucial for this position, but candidates should also be personable and hard working.

To apply for this position, please email rutland@leddygroup.com, call 802-786-2222 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Staff Accountant]]> Leddy Group is looking for a Staff Accountant in Bedford, NH. The Staff Accountant supports the CFO in carrying out the responsibilities of the Finance / Accounting Department with ownership of Accounts Payable, Accounts Receivable and Payroll.

What Your Weeks Will Look Like:

You will:

-Record transactions as they relate to Accounts Receivable.
-Print customer invoices and remit to the customer in the manner required by the customer.
-Identify payment issues and work with customer to resolve problems and collect payment.
-Maintain customer accounts receivable files
-Record transactions as they relate to Accounts Payable.
-Process customer invoices including matching invoices to receivers and obtaining management approval where required.
-Resolve vendor invoice discrepancies.
-Prepare the weekly accounts payable check run for signature by the CFO.
-Process weekly time cards for hourly employees.
-Work with the CFO to prepare the biweekly payroll for processing at ADP.
-Process vacation and sick time slips in ADP
-Record miscellaneous cash transactions in the financial system.

Other Aspects of the Position:

-Work with the CFO to establish credit limits for new customers.
-Reconcile the company bank accounts each month.
-Prepare reports as required for the CFO.
-Work with the CFO to implement a new ERP system including the financial module.
-Support monthly closing process and prepares reports used during the closing process.
-Maintain accounting controls by following policies and procedures; complying with federal, state, and local financial legal requirements.
-Other duties as assigned

Skills:

--Attention to Detail
Confidentiality
-Quality Focus
-Good analytical and problem-solving skills
Ability to assess a requirement and independently determine the necessary steps to -achieving the requirement
-Must be a perfectionist by nature, with no tolerance for financial sloppiness
-Must be skilled in use of Excel Spreadsheets
-Must have excellent work habits, including a willingness to work the hours sometimes necessary to complete the get the job done, especially when important deadlines cause greater than normal departmental pressures.


Education/ Work Experience Requirements:

-US Citizenship.
-Minimum of 2 years experience in accounting.
-A Bachelors degree in accounting, or a Bachelors degree in business with emphasis in accounting

-Manufacturing and Aerospace industry experience considered a plus.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Associate]]> Seeking candidates for a Warehouse Associate for a client in Brentwood! This position is first shift, Monday through Friday 8:00am-4:30pm with a 30 minute unpaid lunch. This position is quite physical and may require lifting up to 50 pounds regularly. This client is willing to train the right candidate for this position! Forklift experience is required!

Responsibilities for the Warehouse Associate

  • Pick/Pack on demand and regular orders
  • Prepare for shipment using Freight, Mail, UPS & Fedex
  • Receive items in bulk and stock inventory in appropriate places

Requirements for the Warehouse Associate

  • Forklift driving experience
  • High attention to detail
  • Ability to follow directions
  • Pass a background check
  • Ability to lift up to 50 pounds

The compensation for the Warehouse Associate is $12.50/hour.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Building/Grounds Maintenance Associate]]> Leddy Group is seeking a Building/Grounds Maintenance Associate for a client in Wilton, NH. This role will require working inside and outside on the property, doing the following duties

  • basic electrical/plumbing
  • snow removal
  • grounds/building maintenance

This position does require being able to lift up to 50lbs, working independently, and safely. We are looking for someone that wants full-time, long term work. Applicants should have at least 2 years of building/grounds maintenance experience.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Database Manager]]> Leddy Group is seeking a well-qualified individual to serve as a Database Manager for a local non-profit organization. Responsibilities include maintaining a customer relations management database powered by Raiser's Edge. Additional responsibilities include donor relations functions such as processing inbound donations, writing thank you letters, and organizing donor information.

Candidates should be organized, personable, and passionate about providing resources to those who do not otherwise have access to them. Experience working with Raiser's Edge is preferred, but at least some CRM experience is required. This position is not permanent but has the potential to be, especially if an individual has office management skills.

To apply, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com, or visit us at leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Clerk (2nd Shift)]]> Leddy Group is seeking a 2nd shift Warehouse Clerk in Rutland, VT. Position includes performing inventory counts on boxes, packaging and bringing supplies to warehouse shipping area. 
 
Candidates should have good hand-eye coordination, good manual dexterity, and be dependable. 
 
Contact Leddy Group to apply.  Email rutland@leddygroup.com, call us at 802-786-2222 or visit www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Facilities Mechanic/Maintenance Associate]]> Leddy Group is seeking a Facilities Mechanic/Maintenance Associate in Lebanon, NH. Interested candidates must be able to use power tools safely and lift 35# intermittently. You will be assisting with a variety of projects and must be very self motivated.

Successful candidates will have strong attention to detail, be reliable and ideally possess some basic machine maintenance skills. This is a 1st shift opportunity and will be on a supplemental basis lasting about 6 months.

Interested candidates can apply by emailing a resume to Lebanon@leddygroup.com, calling 603-727-0102 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Part-Time Office Assistant]]> Leddy Group is seeking a Part-Time Office Assistant in Seabrook, NH.  

Candidates should have prior office or paperwork experience preferred - willing to consider all background with skills. Customer Service experience is needed.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Receptionist/Occupancy Clerk]]> Leddy Group is seeking a Receptionist/Occupancy Clerk in Rutland, VT. Candidates should have prior office experience, strong customer service and communication skills, and excellent organizational skills.  Candidates should be able to multi-task, prioritize work, and be able to work independently. 

Position works Monday through Friday,  8AM-4:30PM.  Contact Leddy Group to apply at 802-786-2222.  Email resumes to rutland@leddygroup.com or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Servers]]> Leddy Group is looking for Servers at a food cart in Kittery, ME. Full time hours available!

No experience required and pay is $15/hour.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator]]> Leddy Group is looking for a Machine Operator in Lancaster, NH. This position is responsible for safe operation of packaging machines while adhering to production schedules and quality standards.

Responsibilities of the Machine Operator:

--Fill cartons with packaged product after visual inspection and lot code check

--Record inspection and/or test results hourly in compliance with product specifications and complete required documentation

--Inspect raw material and packaging components for defects

--Test finished product for leaks, quality seals and accurate labels

--Utilize company specific production and communication software programs

--Maintain work area and equipment to the highest standard of cleanliness

--Observe all safety rules and perform duties in a safe manner

--Other tasks as assigned by supervisor

Qualifications of the Machine Operator:

--Demonstrates mechanical aptitude, problem solving and decision-making skills

--Able to use basic computer software applications

--Legible hand writing required

--Ability to work on a team and interact professionally with others a must

--High school diploma or general education degree (GED) a

--0-2 years of experience in the field or related area.

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[National Sales Manager]]> Leddy Group is hiring a National Sales Manager who will be responsible for promoting core and specialty products to hospital and related industries. 

Candidates must have experience in this industry and a book of hospital purchasing decision contacts. 

This company is growing and they are looking for a candidate who can not only increase sales and develop new product sales but also someone with experience managing a sales force for regional sections across the US.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Leddy Group is seeking 1st shift Production Workers in Rutland, VT for a project. Responsibilities will include sorting and packaging items as well as some production line work.

Interested candidates can apply by visiting our website at www.leddygroup.com, emailing Rutland@leddygroup.com or calling 802-786-2222. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator]]> Leddy Group is looking for a Machine Operator in Bethel, VT to work 1st shift.  This role would also be helping within assembly, doing quality control and various other tasks relating to production. 
 
The successful candidate will have prior experience, be reliable, a critical thinker and able to problem solve. Pay rate is $11.50 per hour.
 
To apply, call Leddy Group at 603-7272-0102, e-mail Lebanon@leddygroup.com or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Welder]]> Leddy Group is looking for a Welder for a company in North Berwick, ME. 

Duties of the Welder include:

  • Ability to set up work center
  • Organize production requirements
  • Maintain accurate counts
  • Understand and adhere to product acceptability and quality requirements
  • Accurate and consistent record keeping
  • Work overtime as required

The ideal candidate will have:

  • Safety orientated work focus
  • A minimum of two years of welding and fabrication experience
  • Ability to obtain welding qualification
  • Ability to utilize welding fixtures (when available)
  • Ability to develop temporary fixtures for custom work
  • Ability to interpret engineered drawings
  • Ability to interpret welding symbols
  • Ability to use basic measuring equipment
  • Ability to work with minimal supervision
  • Ability to perform in a high stress fast paced manufacturing environment
  • Ability to adapt quickly to changes in production requirements
  • Ability to perform in a team environment
  • Attention to detail
  • Organizational skills
  • Basic math
  • Basic computer skills
  • Ability to lift up to 50 lbs.

Pay is $17/hr+ DOE. Candidate must be able to pass a drug screen and a criminal background check.

To apply, please go to leddygroup.com or send your resume to seacoast@leddygroup.com

 

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Warehouse Associate]]> Leddy Group is seeking a Warehouse Associate in Stratham, NH.  Candidates should have experience with warehouse and order picking. 

Candidates should be hard working, be able to lift up to 40lbs, and have good communication skills.  Position is 2nd shift, Sun - Thurs 5pm - 1:30am

Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com to apply. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Asset Manager]]> Leddy Group is looking for for an Asset Management in Dover, NH.

We are currently looking for a candidate who is customer service-minded, fun and a great communicator! Interested candidates should be able to lift up to 50 pounds and stand or walk most of the shift.

Responsibilities of the Asset Manager

  • Day to day material handling/disassembly, transport, inventory, shipping, receiving and scrap activities as required
  • Work on product through the warehouse in accordance with instructions and procedures
  • Assists with updating the customer summary monthly as required/directed
  • Ensure proper processing , data collection, charges, receipt or disposal of product is carried out
  • Coordinate with Deployment, warehouse lead, asset management lead, inventory clerk and expediter to ensure priorities and issues are communicated
  • Assist and support operations teams; including, but not limited to, disassembly of registers and processing tear downs as well as receipts of materials yielded

Requirements of the Asset Manager

  • Maintain a consistent and positive attendance pattern
  • Manage time efficiently
  • High school diploma or GED and 1-3 months related experience or training
  • Must have experience in or a working knowledge of inventory and or asset management. 
  • Must have general mechanical understanding of repair or manufacturing assembly/disassembly functions.
  • ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
  • Ability to write routine reports and correspondence.
  • Ability to speak effectively before groups of customers or employees
  • Basic math skills

This position is first shift, Monday through Friday 8am-4:30pm with a 30 minute unpaid lunch. The compensation for this position is $12.50-$13.00/hour.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Material Handler (1st Shift)]]> Leddy Group is currently seeking candidates to fulfill a 1st Shift Material Handler for a local client.

This is a long term, permanent opportunity for the right candidate.

To apply for this position, please email rutland@leddygroup.com, call 802-786-2222 or apply online at www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Lathe Set-Up Machinist]]>

Leddy Group is seeking a CNC Lathe Set-Up Machinist in the Exeter, NH area. Candidates should have a minimum of 5 years experience.

Candidates should be productive, able to work with minimal supervision, and have the ability to follow verbal or written instructions.

Background check and drug screening required. Position is paying $22/hr depending on experience

Contact the Leddy Group to apply by sending your resume to Seacoast@LeddyGroup.com, calling 603-749-4810 or visiting www.leddygroup.com to be prescreened for this position.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[CNC Machinist ]]> Leddy Group is seeking a 2nd Shift CNC Machinist for a great local company in Manchester, NH. This is a long term, permanent opportunity for the right candidate. This position will require set-up and operation experience on 3,4 & 5 axis machines. 

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Retainer Operator]]> Leddy Group is seeking a Retainer Operator to load, run and unload retainers in Lebanon, NH.  Interested candidates must be able to stand for long periods of time doing repetitive tasks and lifting up to 30 lbs occasionally.  

Successful candidates will have strong attention to detail, be reliable and ideally possess some manufacturing experience. This is a 1st shift opportunity to get your foot in the door with an excellent manufacturing company. 

Interested candidates can apply by emailing a resume to Lebanon@leddygroup.com, calling 603-727-0102 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Manual Machinist]]>

Leddy Group is seeking a Manual Machinist in the Exeter, NH area. Candidates should have experience working with Lathes and Mills, as well as GD&T experience. 

Candidates should be productive, able to work with minimal supervision, and have the ability to follow verbal or written instructions.

Background check and drug screening required. Position is paying $24/hr depending on experience

Contact the Leddy Group to apply by sending your resume to Seacoast@LeddyGroup.com, calling 603-749-4810 or visiting www.leddygroup.com to be prescreened for this position.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Quality Inspector]]> Leddy Group is seeking a Quality Inspector for a great company in Manchester, NH! This is a long term, permanent opportunity for the right candidate!

This position will involve inspecting parts with a strong attention to detail, measuring to ensure specifications are met, rejecting/approving each piece and documenting on each piece on each job. 

To apply, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Customer Service Representative]]> Leddy Group is currently seeking candidates to fulfill an immediate opening for a Customer Service Representative. This position is a full time, long term opportunity for the right fit as this client is looking for team members to join their "family". Some of the daily responsibilities would include fielding incoming calls, data entry and assisting customers with issues that may arise.

Successful applicants will have one to two years of customer service experience with the ability to handle a higher volume of incoming calls while maintaining exceptional customer service and real time data entry.

To apply, please call Leddy Group at 603-666-4051, email Bedford@Leddygroup.com or visit our website at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[General Laborer]]> Leddy Group is seeking a General Laborer in the Gilford, NH area.  Position will include sanding, staining, painting, and general yard clean up.  

Candidates must be able to follow directions, be reliable, and able to work independently.  Position works outside and may be exposed to inclement weather conditions.  Position is supplemental working Monday through Friday, 7:30 AM-4:00PM. 

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Customer Service Representative]]> Leddy Group is seeking a Full-Time Supplemental Customer Service Representative in Springfield VT. Responsibilities will include answering 100+ calls per day and knowing what to prioritize as well as daily admin tasks.

Candidates should be friendly, professional, and very customer service oriented.  Strong customer service skills and comfort with computer systems are required.

Interested candidates can apply by emailing Lebanon@leddygroup.com, calling 603-727-0102 or visiting our website at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Quality Manager]]> Leddy Group is looking for a Quality Manager for a client in Gonic, NH.

Candidates MUST have knowledge in the following:

- Manufacturing

- Calibration

- Statistical Process Control

- ISO 9001 - 2015

- MS Word and Excel

Pay is $20 - $25/hr DOE. First shift available.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator (2nd Shift)]]> Leddy Group is seeking a 2nd shift Machine Operator in Rutland, VT. Candidates must be able to lift up to 50 lbs and stand for long periods of time. The position requires very strong machine operation skills and/or mechanical skills.

Candidates should be patient, physically strong, able to work well at a fast pace and be able to read/use a tape measure down to a 16th of an inch.

This is a 2nd shift, long term opportunity that runs from 3:00 pm - 11:00 pm Monday - Friday.

To apply, email Rutland@leddygroup.com, call 802-786-2222 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator - Respool (3rd Shift)]]> Leddy Group is currently recruiting for a talented Respool Machine Operator for our client in Manchester, NH

Position Summary for Respool Operator:

Set-up and operation of finished goods respool machine according to manufacturing spec and job cards.

  • Responsible to meet production standards by performing quality checks in accordance with ISO quality procedures.

  • Troubleshoot manufacturing process, meeting production schedules and customer deadlines

  • Must complete written production paperwork neatly and legible

  • Maintain cleanliness of machines including utilizing Jet Printers to print cables according to specifications

  • Perform preventative maintenance functions

  • Communicate and work closely with fellow operators and supervisors to produce quality products

  • Observes safety procedures and use equipment and materials properly

  • Work a full time shift schedule with regular attendance and ability to work overtime as needed

Knowledge Skills and Abilities:

  • Reading comprehension skills to understand written manufacturing specifications and instructions and procedures in English

  • Oral communication skills to exchange information with co-workers and supervisors

  • Good math skills and above average mechanical aptitude necessary

  • Attention to detail is required in machine operation and minimizing scrap

  • Familiar with different wire gauges and handling a variety of cable products

  • Hands on experience using micrometers, calipers, gauges, and other measuring devices

Qualifications:

  • High School Diploma or GED

  • One-year manufacturing experience and skills with machinery equipment and troubleshooting desired

  • Cable and wire experience a plus

  • Must have visual acuity and ability to distinguish colors and pass a colorblind test

  • Ability to stand for long periods of time

  • Frequent bending, stooping, moving within the plant

  • Repetitive pushing and pulling motion of wire cable materials and metal reels

  • Required to talk, hear and demonstrate manual hand and finger dexterity, and eye-hand coordination to handle machinery, materials, tools and parts

  • Maneuver large reels of cable

This opportunity is available Monday - Friday, on 3rd Shift,  and is being offered on a Supplemental to Direct Basis. The rate of pay for this position is up to $14/hour for a qualified candidate.

Candidates interested in this role must be able to lift, carry a minimum of 50 lbs. of objects, materials, product, etc.

Interested applicants should send a resume to Bedford@leddygroup.com call 603-666-4051 or visit www.leddygroup.com today!

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Injection Mold Machine Operator]]> Leddy Group in the Derry, NH area is seeking an Injection Mold Machine Operator. Candidates should have at least 1 year of prior experience and the ability to run machines for injection molding plastics. Candidates must be dependable and be able to write, read, and speak English.

Position works Monday through Thursday, 6:00 am-6:00 pm. Position is supplemental with potential for growth.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Support and Service Associate]]> Leddy Group is currently recruiting for a Support and Service Associate for our client in Londonderry, NH.

Major responsibilities of the Support/Service Associate include:

  • Provide phone and email based trouble shooting and applications assistance to contractors, dealers, engineers and sales staff.

  • Start and maintain accurate and detailed computer based electronic records of calls.

  • Review technical material to verify correctness.

  • Provide troubleshooting and applications support internally to Customer Service Team and outside sales representatives.

  • Provide peer level guidance and technical knowledge to others within area(s) of technical expertise.

  • Perform other duties as requested and required.

Qualifications of the Support/Service Associate:

  • Occasional travel required.

  • High School diploma or Equivalent.

  • 2+ years of technician experience and/or experience troubleshooting mechanical/electrical products over the phone or in person.

  • Strong computer, keyboarding (minimum 25 WPM) and phone skills.

  • Strong customer orientation, communication skills and ability to function as a member of a team.

  • Organization, attention to detail, and an overall sense of urgency and ownership.

  • Strong problem solving skills and willingness to take initiative.

  • Experience with Microsoft Word, Excel, Access, or Outlook.

  • A positive attitude and mindset to achieve individual and departmental goals.

  • Knowledge of fuel combustion, heat exchange/transfer, fluid transfer, fresh air and exhaust systems.

  • Direct experience in domestic hot water systems, hydronic heating system, solar thermal system, or other space heating system.

  • HVAC experience or other mechanical experience with system piping and venting, combustion, natural gas or oil burner experience required.

This position is a full time, direct hire position. The hours of the position are Monday - Friday 10:00am - 6:30pm, once trained. The rate of pay being offered is up to $45k/year, plus bonus. Bonus is company performance based. This role is non-exempt, hourly, so candidates will be eligible for overtime.

*Only candidates that align with the above description should apply*

Interested applicants should send a resume to Bedford@leddygroup.com, call 603-666-4051 or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Sheet Metal Fabricator]]> Leddy Group is seeking a 1st shift Sheet Metal Fabricator for our Bow, NH based client.

This position requires strong math skills and the ability to interpret blueprints and drawings to fabricate aluminum shapes with power brakes and shears. Drilling, abrading, sawing, assembly, fastening, finishing and related functions using electric or pneumatic tools and machinery are also required. Prior experience shaping and cutting aluminum with a press brake/shear required. Must be able to lift up to 50lbs.

Our client is highly motivated to fill this Supplemental to Direct position! To start your journey today, email your resume to Bedford@leddygroup.com, call 603-666-4051 or visit www.bedford@leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Medical Receptionist]]> Leddy Group is seeking a Medical Receptionist for an elderly living community in Lebanon, NH.  Qualified candidates should have experience answering phones, customer service, and basic computer skills as well as be reliable and professional

This is a supplemental position. The hours will be Monday-Friday 8:00-3:00

To apply for this position, please email lebanon@leddygroup.com, call 603-727-0102 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electrical Assembler]]> Leddy Group is currently recruiting for an Electrical Assembler to join the team at our client in Epsom, NH

Major responsibilities of the Electrical Assembler include:

  • This job is for machine wiring and requires the ability to read, understand, and work from electrical schematics (Point-to-point or wire run lists are not provided).

  • These are one-of-a-kind designs, so the ability to work with Engineering to question and correct prints is required.

  • Mechanical assembly of all components is required prior to wiring.

  • De-bugging and verification of all functions after wiring is complete is required.

  • Setting up and testing instrumentation is required, training for this will be provided

  • This job involves working with all voltages, AC and DC, up to 480 volt single and 3 phase.

Qualifications of the Electrical Assembler:

  • Familiarity with NFPA 79 and NEC is preferred.

  • Familiarity with PLC wiring / troubleshooting is preferred

This position is a full time, supplemental to direct position. The hours of the position are Monday - Friday 8:00am - 4:30pm. The rate of pay being offered is up to $17/hour.

Due to the nature of the government contracts involved at this client, U.S. Citizenship is required.

Candidates interested in this role must be able to comfortably lift up to 50lbs throughout the duration of an entire shift.

This position requires the completion of a state criminal background check and a drug screening upon the receipt of a job offer.

Interested applicants should send a resume to Bedford@leddygroup.com, call 603-666-4051 or visit our website www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Inventory Material Mover]]> Leddy Group is seeking an Inventory Parts Mover in Lebanon, NH. The inventory parts mover is responsible for physically moving material to all different areas of the plant.

Candidates must have attention to detail, be able to multi-task and coordinate work activities to be efficient & productive.  Candidates also be proficient with computers and have basic math skills as well as have the ability to lift 30 lbs. High School Diploma or GED required and 1+ years experience in a similar job field preferred.

This is a 1st shift, assignment that is supplemental to direct.

Interested candidates can apply by emailing a resume to Lebanon@leddygroup.com, calling 603-727-0102 or apply online at www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Part-Time Inventory Stock Associate]]> Leddy Group is looking for a Part-Time Inventory Stock Associate in Rochester, NH. This position will be unpacking and stocking fastener supplies within a manufacturing environment.

Schedule is Tuesdays from 8-2, 9-3, or 10-4; hours are flexible but must be consistent. Pay is $13-$15/hour. Looking for someone who can commit long term to this position. 

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Material Handler ]]> Leddy Group is currently seeking a Material Handler for a client in Belmont, NH. This position will involve utilizing electric pallet jacks to move product in a large warehouse.

The job does require being able to lift 50lbs, utilize pallet jacks, and a high sense of urgency.

To apply please call Leddy Group at 603-666-4051, email resumes to Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Picker/Packer ]]> Leddy Group is seeking a Picker/Packer in Dover, NH.  Position fulfills customer/client orders, merchandise, and promotional items by retrieving picking sheets, scanning orders, and picking appropriate merchandise. Position will also inspect items for defects and package for shipment.

Candidates should have good communication skills, have basic math skills, and the ability to read and follow pick lists.  Position works 1st shift. 

Contact Leddy Group to apply. Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Injection Mold Machine Operator]]> Leddy Group in the Derry, NH area is seeking an Injection Mold Machine Operator.

Candidates should have at least 1 year of prior experience and the ability to run machines for injection molding plastics. Candidates must be dependable and be able to write, read, and speak English.

Position works Monday through Thursday, 6:00 am-6:00 pm. Position is supplemental with potential for growth.

To apply for this position, please email Bedford@leddygroup.com, call 603-666-4051 or apply online at www.leddygroup.com

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electronics Technician]]> Leddy Group is actively seeking an Electronics Technician in Dover, NH.  Position will work on test and repair jobs by performing pass/fail and diagnostic testing on electronic equipment, such as iPods and iPads. Position includes programming and troubleshooting. 

Qualified candidates must have at least one of the following qualifications in process:

  • Troubleshooting with PC equipment: hardware & or software
  • Software development
  • POS application experience / POS hardware
  • Experience with visual basic, scripting & or coding (html/C++)
  • Programming network routers / Networking
  • System admin experience
  • Apple / MAC related experience.

This position is full time and 1st shift.

Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com to apply. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Part-Time Night Custodian]]> Leddy Group is seeking an experienced Custodian to work 9pm to 3am Tuesday through Saturday. Hours are flexible. Position promises 20 hours per week, but could become full time for the right candidate.

The position entails cleaning the kitchen for a restaurant in Rutland, as well as local office buildings. Must be extremely reliable, hard working, and be able to work independently.

To apply, please call Leddy Group at 802-786-2222, email Rutland@leddygroup.com or visit www.leddygroup.com

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator (2nd Shift)]]> Currently seeking a Machine Operator to organize and supply machine with sheets of glass for cutting for a 2nd shift, full time, long term opportunity in Portsmouth, NH. The ideal candidate will have at least 6 months of machine operating or industrial related experience.

Responsibilities of the Machine Operator:

  • Complete operation of small cutting machine to include: maintenance of quality cuts, change-over and production levels.
  • Breaking of glass into 4" units.
  • Follow work orders to insure quality product.
  • Make decisions concerning minor adjustments to insure best quality products.
  • Miscellaneous duties as assigned.

Requirements of the Machine Operator

  • Basic math and computer entry skills.
  • Excellent Communication skills.
  • Able to work in a fast paced environment.
  • Able to read, write and understand English.

Compensation starts at $13/hour. 

Hours: 4pm-2:30am; Monday thru Thursday

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Press Brake Operator]]> Leddy Group is seeking an experienced Press Brake Operator for a great company in Hollis, NH. This is a long term, permanent opportunity for the right candidate. 

This position does require the ability to understand complex instructions, how schematics work and make sure items are designed and built correctly. 

To apply for this position, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com.

 

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Press Brake Mechanic]]> Leddy Group is currently seeking candidates for a Press Brake Mechanic role in Hollis, NH. This is a long term, permanent opportunity for the right fit. 

This position requires mechanical experience, attention to detail and experience in fabrication/welding. 

To apply for this position, please call Leddy Group at 603-666-4051, email Bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Production Worker]]> Leddy Group is seeking a Production Worker in Dover, NH.  This position involves both assembly and using machines to perform a heat sealing process. 

Candidates must have good manual dexterity, good math and measuring skills, and be dependable. Candidates should have good attention to detail and be able to keep up with production. High School Diploma or GED required.

This is a long term, full time position on the 2nd shift. The position pays $11.50 per hour.

Contact Leddy Group to apply. Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[General Laborer]]> Leddy Group in the Ludlow, VT area is looking for an individual to help with landscaping, maintenance, and winter preparedness for a condo complex.
 
Candidates should be able to handle a physical position and be prepared to work outside in the elements and be dressed appropriately. Also, candidates should be dependable and motivated to work. Position is seasonal, working 1st shift.
 
To apply for this position, please email rutland@leddygroup.com, call 802-786-2222 or apply online at www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Custodian]]> Leddy Group is seeking individuals that are looking to join a fantastic organization in Milford, NH. 

We are looking for energetic individuals interested in janitorial and custodial positions who have a positive attitude and a strong work ethic.

Candidates with prior cleaning experience are preferred.

To apply, please call 603-666-4051, email bedford@leddygroup.com or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Cable Assembler]]> Leddy Group is seeking a Cable Assembler in Portsmouth, NH.  Position will prepare and assemble cables and cross-train in other production operations. 

Candidates should be able to read and write English, read and interpret blueprints, and be able to use measuring tools. 

Contact Leddy Group to apply. Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Machine Operator (3rd Shift)]]> Leddy Group is seeking a 3rd Shift Machine Operator in the Gonic, NH area. The position will also be degreasing machines.
 
Prior manufacturing experience is preferred. Candidates should have good communication skills, basic math skills, the ability to read blueprints, and be dependable.
 
Contact Leddy Group to apply.  Email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Customer Service Representative]]> Are you looking for a customer service position in the central New Hampshire area?

The Customer Service Representative will report to the Call Center Supervisor and is responsible for answering routine telephone inquiries in a professional, customer-oriented manner by following standard scripts and procedures.  Must have an on-going knowledge of company policies/guidelines as directed by management; and remain flexible and willing to adjust to other duties based on business needs.  Other duties to include, but are not limited to: notice quality review, image review, and customer case management.

Qualification/Requirements

  • High school diploma or GED Certificate is required; one to two years related supervisory experience in customer service and/or retail industry; or equivalent combination of education and experience.
  • Excellent communication skills.
  • Clear and professional speaking voice.
  • Strong process, analytical, and organizational skills.
  • Demonstrated productivity in a team environment, focusing on customer satisfaction.
  • Highly developed sense of integrity and commitment to operational excellence.
  • Must possess strong computer skill-sets with emphasis on MS-Office products such as Excel, Access, PowerPoint, and Word are highly desirable.

This is a full-time role with some Saturdays, supplemental to direct, and offers great benefits once hired on!

Interested? Send your resume to Bedford@leddygroup.com, call the office at 603-666-4051 or visit www.leddygroup.com. 

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Sales Administrative Assistant]]> Now hiring a Sales Administrative Assistant organization in Dover, NH. This position will have exposure to all aspects of the business including purchasing, sales support, cost analysis and customer service. Must have strong Excel skills that include a working knowledge of pivot tables.

The responsibilities for this position include: 
- Sales Support (document preparation, administrative assistance, and reporting) 
- Customer Service and Problem Resolution
- Financial and Material Analysis for RFQ Responses
- Introductory Sales Support and Procurement Activity. 

The normal hours for this position are Monday- Friday, 9:00 am - 5:30 pm with flexibility needed.  

Qualified candidates may submit your resume to Seacoast@LeddyGroup.com, call 603-749-4810 or visit us online at www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Electronic Components Production Technician]]> Currently seeking candidates with great hand dexterity, good communication skills, is a team player and who can read and interpret detailed work instructions to build, inspect and test electronics.

Responsibilities of the Electronic Components Production Technician:

  • Winding wires around electric components that go into nuclear detectors, heart monitors etc.
  • Keep work station organized and clean

Requirements of the Electronic Components Production Technician:

  • Willing to learn on the job
  • High attention to detail
  • Team player
  • Ability to read and interpret detailed work instructions to build, inspect and test electronic components

Compensation for this position is $10.50/hr. This is a first shift position Monday through Friday 6am-2:30pm with a 30 min unpaid lunch break.

To apply for this position, please email seacoast@leddygroup.com, call 603-749-4810 or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Entry Level Machine Operator]]> Leddy Group is seeking Entry Level Machine Operators for injection molding plastics in Wilton, NH. This position will involve operating the machine, performing visual inspection on parts and using measuring tools to verify defects. 

Candidates should have good communication skills, have basic math skills, ability to read and use measuring tools, and be dependable. Openings on all shifts. 

Contact Leddy Group to apply.  Email bedford@leddygroup.com or visit www.leddygroup.com.

]]>
Mon, 18 Sep 2017 00:00:00 EDT 1
<![CDATA[Quality Inspector]]> Leddy Group is seeking a Quality Inspector with a background in reading blueprints and SPC knowledge in the Gonic, NH area. Position will include maintaining system, roving inspections, first piece inspections, and verifying finished product routine audits. 
 
Candidates should be dependable and able to work independently. This is a 1st shift position with overtime opportunities. 
 
Contact the Leddy Group to apply. Email seacoast@leddygroup.com, visit www.leddygroup.com, or call 603-749-4810.
]]>
Mon, 18 Sep 2017 00:00:00 EDT 1